OSHA 510 EXAM PREP-MNT EXAM QUESTIONS AND
ANSWERS 100- SOLVED Newest 2025
1. The Four basic elements of OSHA's Safety and Health Management Guidelines are: - ✔✔✔a. Hazard
Prevention
b. Safety and Health Training
c. Worksite Analysis
d. Management/Employee Involvement
10. OSHA incident rate is based on how many workers regardless of how many are employed? - ✔✔✔a.
The incident rate is based upon recordable injuries and illnesses per 100 full-time workers
b. Where it is found: 300A log & BLS webpage
11. What would be a restrictive activity? - ✔✔✔The day the employee was only able to work a partial
shift *Answer B*
12. Employers can demonstrate their commitment to S & H by: - ✔✔✔Being an example by knowing and
following the rules employees are expected to follow
13. An accident prevention program is required by OSHA. What are the two main elements? - ✔✔✔a.
Safety and Health Program
b. Jobsite inspections by a competent person
14. Who is a.) responsible for determining the competent person(s) at a worksite? And b.) What two
aspects make up competent person criteria? - ✔✔✔a. The employer
b. The ability to recognize hazards and the ability to correct those hazards.
15. Who is responsible for initiating, determining, and maintaining the accident prevention program and
assigning individuals to the tasks under Subpart C? - ✔✔✔The employer
, 16. Accident prevention signs on the job must be when __________ work is being performed. -
✔✔✔Visible
17. A qualified person is designated as such by: - ✔✔✔Means one by possession of a recognized degree,
certificate, or professional standing, or who by extensive knowledge, training, and experience, has
successfully demonstrated his ability to solve or resolve problems relating to the subject matter, the
work, or the project.
18. Tools (hand & power) should be: - ✔✔✔Maintained in a safe condition
19. Failing to inspect for oil and grease on regulator fittings, valves or cap threads on cylinders of oxygen
can: - ✔✔✔Result in a fire or explosion
2. The morale of employees is affected by increased injuries and illnesses? T/F - ✔✔✔True
20. At what heights is fall protection required according to Subpart M? - ✔✔✔6 feet
21. When stopping a fall, a personal fall arrest system shall bring an employee to a complete stop and
limit the maximum deceleration distance to: - ✔✔✔3.5 feet
22. When using mechanical equipment on a roof, what is the minimum the warning line should be
erected? - ✔✔✔10 feet
23. Subpart V states that some activity must be performed before any work can be performed on Power
Distribution and Transmission Systems. What is that task? - ✔✔✔Identify test and determine energies
present.
24. What is the maximum voltage allowable before guards are required to prevent accidental contact? -
✔✔✔50V
25. Assured Equipment Grounding Conductor Program is required when cord-&-plug sets are not part of
the permanent wiring system. T/F - ✔✔✔True
ANSWERS 100- SOLVED Newest 2025
1. The Four basic elements of OSHA's Safety and Health Management Guidelines are: - ✔✔✔a. Hazard
Prevention
b. Safety and Health Training
c. Worksite Analysis
d. Management/Employee Involvement
10. OSHA incident rate is based on how many workers regardless of how many are employed? - ✔✔✔a.
The incident rate is based upon recordable injuries and illnesses per 100 full-time workers
b. Where it is found: 300A log & BLS webpage
11. What would be a restrictive activity? - ✔✔✔The day the employee was only able to work a partial
shift *Answer B*
12. Employers can demonstrate their commitment to S & H by: - ✔✔✔Being an example by knowing and
following the rules employees are expected to follow
13. An accident prevention program is required by OSHA. What are the two main elements? - ✔✔✔a.
Safety and Health Program
b. Jobsite inspections by a competent person
14. Who is a.) responsible for determining the competent person(s) at a worksite? And b.) What two
aspects make up competent person criteria? - ✔✔✔a. The employer
b. The ability to recognize hazards and the ability to correct those hazards.
15. Who is responsible for initiating, determining, and maintaining the accident prevention program and
assigning individuals to the tasks under Subpart C? - ✔✔✔The employer
, 16. Accident prevention signs on the job must be when __________ work is being performed. -
✔✔✔Visible
17. A qualified person is designated as such by: - ✔✔✔Means one by possession of a recognized degree,
certificate, or professional standing, or who by extensive knowledge, training, and experience, has
successfully demonstrated his ability to solve or resolve problems relating to the subject matter, the
work, or the project.
18. Tools (hand & power) should be: - ✔✔✔Maintained in a safe condition
19. Failing to inspect for oil and grease on regulator fittings, valves or cap threads on cylinders of oxygen
can: - ✔✔✔Result in a fire or explosion
2. The morale of employees is affected by increased injuries and illnesses? T/F - ✔✔✔True
20. At what heights is fall protection required according to Subpart M? - ✔✔✔6 feet
21. When stopping a fall, a personal fall arrest system shall bring an employee to a complete stop and
limit the maximum deceleration distance to: - ✔✔✔3.5 feet
22. When using mechanical equipment on a roof, what is the minimum the warning line should be
erected? - ✔✔✔10 feet
23. Subpart V states that some activity must be performed before any work can be performed on Power
Distribution and Transmission Systems. What is that task? - ✔✔✔Identify test and determine energies
present.
24. What is the maximum voltage allowable before guards are required to prevent accidental contact? -
✔✔✔50V
25. Assured Equipment Grounding Conductor Program is required when cord-&-plug sets are not part of
the permanent wiring system. T/F - ✔✔✔True
