100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached 4.6 TrustPilot
logo-home
Exam (elaborations)

FCTC Mechanical Reasoning Test 2026 Complete Questions and Guide Answers 100% Verified (2025 / 2026) Graded A+

Rating
-
Sold
-
Pages
32
Grade
A+
Uploaded on
25-09-2025
Written in
2025/2026

FCTC Mechanical Reasoning Test 2026 Complete Questions and Guide Answers 100% Verified (2025 / 2026) Graded A+ Ace the FCTC Mechanical Reasoning Test with this comprehensive practice guide. Covers mechanical concepts, tools, gears, levers, pulleys, and problem-solving skills needed for the California firefighter candidate written exam. FCTC mechanical reasoning test, firefighter candidate testing center, FCTC exam prep, firefighter mechanical reasoning practice, California firefighter exam, FCTC study guide, firefighter written test, FCTC practice questions, mechanical reasoning exam prep, firefighter candidate test 1. FCTC mechanical reasoning test study guide 2. How to prepare for FCTC mechanical reasoning test 3. FCTC mechanical reasoning test practice questions 4. FCTC mechanical reasoning test passing score 5. FCTC mechanical reasoning test tips and tricks 6. FCTC mechanical reasoning test sample problems 7. FCTC mechanical reasoning test difficulty level 8. FCTC mechanical reasoning test time limit 9. FCTC mechanical reasoning test online resources 10. FCTC mechanical reasoning test for firefighters

Show more Read less
Institution
FCTC
Course
FCTC











Whoops! We can’t load your doc right now. Try again or contact support.

Written for

Institution
FCTC
Course
FCTC

Document information

Uploaded on
September 25, 2025
Number of pages
32
Written in
2025/2026
Type
Exam (elaborations)
Contains
Questions & answers

Content preview

FCTC MECHANICAL REASONING TEST
Questions and Verified Answers
100% Correct Grade A+

1. A)Post A


The weight is distributed more on the side of post A, Therefore, it is holding up the

greatest part of the load.


Answer: Which post holds up the greater part of the load?

A- Post A

B- Post B

C- Both equal

D- Not clear

2. C)Neither of the other gears


Because of the way the gears are meshed, both gear 1 and gear 3 will move in the opposite

direction of gear 2.


Answer: Which of the other gears is moving in the same direction as gear 2?

A) Gear 1


,B) Gear 3

C) Neither of the other gears

D) Both of the other gears

3. A)A


Pulley A is the smallest gear. Therefore, it must turn faster (make more revo- lutions per

minute).


Answer: In this arrangement of pulleys, which pulley turns fastest?

A) A

B) B

C) C

D) D

4. A)Once


The single lobe on cam A will cause the setscrew to hit the contact point once during the

cam's revolution.

Answer: As cam A makes one complete turn in the figure above, the setscrew will hit the

contact point

A) Once


,B) Twice

C) Three Times

D) Not At All

5. A)21


Since gear A has 15 teeth and gear B has 10 teeth, gear A is 1.5 the size of gear B.Therefore

14 x 1.5 = 21.

Answer: 1. When gear A makes 14 revolutions, how many revolutions will gear B make?

A) 21

B) 17

C) 14

D) 9




6. B)Metal Spoon


Metal will feel coldest out of paper, wood, and the fabric of a blanket.

Answer: If all of the following objects are at room temperature, which will feel coldest?

A) Book


, B) Metal Spoon

C) Wooden Chest

D) Blanket

7. C)Air pressure on top of the liquid


The siphon works, in part, because of air pressure on the top of t he liquid.
Answer: In
bucket by
Answer: the illustration above, liquid is being transferred from the barrel to the

A) The vacuum at the lower end of the hose

B) The difference between the fluid volumes in the barrel and bucket

C) Air pressure on top of the liquid

D) Capillary action

8. C)Move downward until it reaches the floor


Newton's Law of Motion states that a body at rest will stay at rest unless acted on by an

outside force. Conversely, a body in motion stays in motion unless acted on by are
anatoutside
rest
quilibrium
practically no
force. In this picture, both objects (equilibrium). When an outside force is added to weight
a pulley, with
d as indicated.
1, the e 1 will

changes, moving this weight downward. Because the pulley has friction,

the weight strikes the floor.

Get to know the seller

Seller avatar
Reputation scores are based on the amount of documents a seller has sold for a fee and the reviews they have received for those documents. There are three levels: Bronze, Silver and Gold. The better the reputation, the more your can rely on the quality of the sellers work.
LECTGRADER Harvard University
View profile
Follow You need to be logged in order to follow users or courses
Sold
404
Member since
1 year
Number of followers
11
Documents
3023
Last sold
4 hours ago

3.9

79 reviews

5
40
4
12
3
14
2
2
1
11

Recently viewed by you

Why students choose Stuvia

Created by fellow students, verified by reviews

Quality you can trust: written by students who passed their tests and reviewed by others who've used these notes.

Didn't get what you expected? Choose another document

No worries! You can instantly pick a different document that better fits what you're looking for.

Pay as you like, start learning right away

No subscription, no commitments. Pay the way you're used to via credit card and download your PDF document instantly.

Student with book image

“Bought, downloaded, and aced it. It really can be that simple.”

Alisha Student

Frequently asked questions