PA state inspection categories test Exam
Questions And Answers Verified 100% Correct
what head lamp system should your vehicle be equipped with - ANSWER two or four
head lamp system
low beam candle watts must be brighter than? - ANSWER 7500
high beam candle watts cannot be less than? - ANSWER 10,000
total candle wattage cannot exceed? - ANSWER 150,000 watts
lamps must be visible from how far? - ANSWER 500 feet
brake lamps must be visible from - ANSWER 100 feet
how many flashes should turn signals be per minute? - ANSWER 60-120
tag lights should be visible from - ANSWER 50 feet
window tint must not pass which line - ANSWER AS1 line
all mirrors must be what? - ANSWER crack free, hold position they are fixed to and be
able to see 200 feet
how many cycles per minute do wipers make - ANSWER 45 cycles per minute
how far should a horn be heard from? - ANSWER 200 feet
fender flares must not exceed? - ANSWER 3 inches
car bumper when measured from lowest point are how high off the ground? - ANSWER
16-20 inches no higher no lower
how high are truck bumpers when measured from the lowest point? - ANSWER 16-30
inches no higher no lower
, two adjacent tread depths of _______ or less fails a car - ANSWER 2/32nds
two adjacent tread depths of _______ or less fails a truck - ANSWER 4/32nds
what type of construction should your head lamps be in a two lamp construction? -
ANSWER type 2
what type of construction should your head lamps be in a four lamp construction? -
ANSWER two lamps shall be type 2 construction and two lamps shall be of type 1 one
contruction
what kind of dimming switch must be installed? - ANSWER manual dimming switch,
and auto can be installed in addition to the manual switch
stop lamps hazards and warning lights must be visible from? - ANSWER 100feet
lamps shall be what? - ANSWER properly fastened, in accordance with tables 2-4,
unobstructed,
ornamental lamps - ANSWER a no go unless they are emergency lights
back up lamps cannot be? - ANSWER on when in forward motion
registration plate lamp must be visible from - ANSWER 50 feet
fog lamps cannot be substituted for? - ANSWER head lamps
auxiliary driving lamp dimensions - ANSWER 20in apart from center to center not more
than 42 inches above level surface
auxiliary driving lamps and fog lamps shall be aimed? - ANSWER in straight ahead
position not above horizontal centerline of lamp at 25 feet
may on have how many auxiliary driving lamps? - ANSWER a pair
auxiliary lamps shall not be used on? - ANSWER snow plows, blocking a primary light,
substituting head lights.
snow plows lamps are wired how? - ANSWER through a double throw switch so they
can be operated separately from head lights
roof or roll bar lights installed shall not be? - ANSWER used on a highway, and are
covered at all times
Questions And Answers Verified 100% Correct
what head lamp system should your vehicle be equipped with - ANSWER two or four
head lamp system
low beam candle watts must be brighter than? - ANSWER 7500
high beam candle watts cannot be less than? - ANSWER 10,000
total candle wattage cannot exceed? - ANSWER 150,000 watts
lamps must be visible from how far? - ANSWER 500 feet
brake lamps must be visible from - ANSWER 100 feet
how many flashes should turn signals be per minute? - ANSWER 60-120
tag lights should be visible from - ANSWER 50 feet
window tint must not pass which line - ANSWER AS1 line
all mirrors must be what? - ANSWER crack free, hold position they are fixed to and be
able to see 200 feet
how many cycles per minute do wipers make - ANSWER 45 cycles per minute
how far should a horn be heard from? - ANSWER 200 feet
fender flares must not exceed? - ANSWER 3 inches
car bumper when measured from lowest point are how high off the ground? - ANSWER
16-20 inches no higher no lower
how high are truck bumpers when measured from the lowest point? - ANSWER 16-30
inches no higher no lower
, two adjacent tread depths of _______ or less fails a car - ANSWER 2/32nds
two adjacent tread depths of _______ or less fails a truck - ANSWER 4/32nds
what type of construction should your head lamps be in a two lamp construction? -
ANSWER type 2
what type of construction should your head lamps be in a four lamp construction? -
ANSWER two lamps shall be type 2 construction and two lamps shall be of type 1 one
contruction
what kind of dimming switch must be installed? - ANSWER manual dimming switch,
and auto can be installed in addition to the manual switch
stop lamps hazards and warning lights must be visible from? - ANSWER 100feet
lamps shall be what? - ANSWER properly fastened, in accordance with tables 2-4,
unobstructed,
ornamental lamps - ANSWER a no go unless they are emergency lights
back up lamps cannot be? - ANSWER on when in forward motion
registration plate lamp must be visible from - ANSWER 50 feet
fog lamps cannot be substituted for? - ANSWER head lamps
auxiliary driving lamp dimensions - ANSWER 20in apart from center to center not more
than 42 inches above level surface
auxiliary driving lamps and fog lamps shall be aimed? - ANSWER in straight ahead
position not above horizontal centerline of lamp at 25 feet
may on have how many auxiliary driving lamps? - ANSWER a pair
auxiliary lamps shall not be used on? - ANSWER snow plows, blocking a primary light,
substituting head lights.
snow plows lamps are wired how? - ANSWER through a double throw switch so they
can be operated separately from head lights
roof or roll bar lights installed shall not be? - ANSWER used on a highway, and are
covered at all times
