Questions with 100% complete
solutions
D)Combustion Air - ANS ✔What is the final adjustment you make when tuning up an oil burner?
A)Draft
B) Change Nozzle
C)Oil Pressure
D)Combustion Air
B)Incomplete Combustion - ANS ✔What is the effect of having a dirty burner squirrel cage fan?
A)Water Hammer
B)Incomplete combustion
C)Low Co2
D)Blocked Chimney
B)Push flue gases through tighter boilers - ANS ✔New burners produce "high static pressure"
A)Produce more spark
B)Push flue gases through tighter boilers
C) Get better atomization
B)Provides a place for bacteria to grow - ANS ✔Water oil in tanks is necessary because?
A) Adds btu value
B) Provides a place for bacteria to grow
, D)All - ANS ✔Water enters tanks through?
A)Fill caps
B)Vents
C)Delivery truck
D)All
A)Tells delivery person when to stop - ANS ✔A "vent alarm"
A)Tells delivery person when to stop
B)Call tech when flame fails
C)Signals when air vent is clogged
C)Use a hand pump to suck the dirt out - ANS ✔The best way to clear a clogged oil line is to
A)Turn the pump pressure up
B)Use a Co2 cartridge
C)Use a hand pump to suck the dirt out
A)T - ANS ✔The vacuum expected on pump can be calculated by 1"hg for every foot of lift and
1" for every 10' run. NOTE: 1/2 for filter
A) T
B)F
B)The flame may pulse - ANS ✔If there is an air leak in the oil suction line to a burner
A)The ignitor will fail
B)The flame may pulse
C)Draft will increase