BICSI PRACTICE TEST-RETAKE QUESTIONS
WITH 100% ACCURATE ANSWERS
The 2 main considerations concerning the existing cabling are? - Accurate answers Grandfathered
system
Abandoned cable 11-25
The type of cutover where cross-connects are relocated one pair after another until completed is called
a - Accurate answers rolling cut 11-28
Which practice involves moving the customer to a temporary office space until their section of the
retrofit is completed and then moving them back to their recabled office space? - Accurate answers
Swing space phasing
Which of these testers would you clamp around a strand of fiber to check for the presence of light? -
Accurate answers Fiber strand identifier 11-11
A ______ provides a quick graphical representation of how the circuit is layed out? - Accurate answers
CLR 11-27
A ______ uses several pluggable modules to locate and Identify cables. - Accurate answers Office
locator kit
A _________ injects light (at a proper wavelength) and measures the results t the other end. -
Accurate answers Light source and power meter
A ________ detects the presence of light within a fiber strand - Accurate answers Fiber strand
identifier
A _______ uses a laser to identify fiber strands and find breaks in the fiber at the near end. - Accurate
answers Visual fault locator
A________ will leave the customer momentarily without communications - Accurate answers Hot-
cut 11-28
During a _______, cross-connects are relocated one pair after another until completed. - Accurate
answers Rolling cut
*_________ is a property of an electromagnetic field built around a conductor that opposes any changes
in current flow in a circuit. - Accurate answers Inductance
____________ is a property of conductors that allows storage of electrical charges when potential
differences (voltages) exist between the conductors. - Accurate answers Capacitance
, *In AC circuits, the total opposition to current flow is called _________, which is measured in ohms. -
Accurate answers Impedance
The nominal characteristic impedance of balanced twisted pair cable is _______ ohms at 100 MHz -
Accurate answers 100
Pair 626 would be in the __________ Super Binder - Accurate answers Red
Series ______ is the preferred choice for longer runs - Accurate answers 11
The _________ connector/s have center pins (choose all that apply) - Accurate answers N
BNC
The way in which others perceive an employee can be divided into 3 distinct areas: body language, Tone
of voice and choice of words. Which of the 3 makes the biggest impression? - Accurate answers
Body language - 55%
The range of human hearing is from _________ - Accurate answers 20 Hz- 20,000 Hz
An increase of _______ will result in a doubling or halving of the power. - Accurate answers 3 dB
Increases or decreases of ________ for voltage will cause an increase or decrease of 10 times the
original value. - Accurate answers 6 dB
The code stands for "flush-or surface-mounted jack" - Accurate answers C
A "push to talk" intercom system would be an example of a ______ transmission method. - Accurate
answers half-duplex 1-1
__________ quantifies the bandwidth of a cabling system in a frequency range of interest. - Accurate
answers Megahertz
_________ refers to the amount of information that can be transported over the media. - Accurate
answers Megabit
A gauge change of ____ numbers approximately doubles or halves the conductors resistance -
Accurate answers 3
A gauge change of _______numbers approximately doubles or halves the conductors diameter -
Accurate answers 6
______ is not recommended for new installations (what type of fiber) - Accurate answers OM2
What type of fibers typically support wavelengths of 850 nm and 1300nm - Accurate answers OM1
OM2
OM3
WITH 100% ACCURATE ANSWERS
The 2 main considerations concerning the existing cabling are? - Accurate answers Grandfathered
system
Abandoned cable 11-25
The type of cutover where cross-connects are relocated one pair after another until completed is called
a - Accurate answers rolling cut 11-28
Which practice involves moving the customer to a temporary office space until their section of the
retrofit is completed and then moving them back to their recabled office space? - Accurate answers
Swing space phasing
Which of these testers would you clamp around a strand of fiber to check for the presence of light? -
Accurate answers Fiber strand identifier 11-11
A ______ provides a quick graphical representation of how the circuit is layed out? - Accurate answers
CLR 11-27
A ______ uses several pluggable modules to locate and Identify cables. - Accurate answers Office
locator kit
A _________ injects light (at a proper wavelength) and measures the results t the other end. -
Accurate answers Light source and power meter
A ________ detects the presence of light within a fiber strand - Accurate answers Fiber strand
identifier
A _______ uses a laser to identify fiber strands and find breaks in the fiber at the near end. - Accurate
answers Visual fault locator
A________ will leave the customer momentarily without communications - Accurate answers Hot-
cut 11-28
During a _______, cross-connects are relocated one pair after another until completed. - Accurate
answers Rolling cut
*_________ is a property of an electromagnetic field built around a conductor that opposes any changes
in current flow in a circuit. - Accurate answers Inductance
____________ is a property of conductors that allows storage of electrical charges when potential
differences (voltages) exist between the conductors. - Accurate answers Capacitance
, *In AC circuits, the total opposition to current flow is called _________, which is measured in ohms. -
Accurate answers Impedance
The nominal characteristic impedance of balanced twisted pair cable is _______ ohms at 100 MHz -
Accurate answers 100
Pair 626 would be in the __________ Super Binder - Accurate answers Red
Series ______ is the preferred choice for longer runs - Accurate answers 11
The _________ connector/s have center pins (choose all that apply) - Accurate answers N
BNC
The way in which others perceive an employee can be divided into 3 distinct areas: body language, Tone
of voice and choice of words. Which of the 3 makes the biggest impression? - Accurate answers
Body language - 55%
The range of human hearing is from _________ - Accurate answers 20 Hz- 20,000 Hz
An increase of _______ will result in a doubling or halving of the power. - Accurate answers 3 dB
Increases or decreases of ________ for voltage will cause an increase or decrease of 10 times the
original value. - Accurate answers 6 dB
The code stands for "flush-or surface-mounted jack" - Accurate answers C
A "push to talk" intercom system would be an example of a ______ transmission method. - Accurate
answers half-duplex 1-1
__________ quantifies the bandwidth of a cabling system in a frequency range of interest. - Accurate
answers Megahertz
_________ refers to the amount of information that can be transported over the media. - Accurate
answers Megabit
A gauge change of ____ numbers approximately doubles or halves the conductors resistance -
Accurate answers 3
A gauge change of _______numbers approximately doubles or halves the conductors diameter -
Accurate answers 6
______ is not recommended for new installations (what type of fiber) - Accurate answers OM2
What type of fibers typically support wavelengths of 850 nm and 1300nm - Accurate answers OM1
OM2
OM3
