LOW PRESSURE BOILER BLACK SEAL 2025 LATEST
QUESTIONS WITH 100% VERIFIED ANSWERS||
BRAND NEW!!
Where on the Certificate of Inspection would you find the State of New Jersey
jurisdiction number? -CORRECTANSWER upper left corner
Which of the following best describes the combustion chamber of a serpentine tube
heating boiler? -CORRECTANSWER it is located below the tubes
By N.J.A.C. rules, a school with a boiler plant with a total interconnected capacity of 100
BHP would require a properly licensed operator to be present whenever the building
was deemed occupied. -CORRECTANSWER false
Which of the following is not a classification of a hot water system? -
CORRECTANSWER a Hartford loop system
When bringing a steam heating plant on line from a cold start, when the ambient
conditions are about 20 degrees F, what condition are you preventing when the
pressure is increased gradually? -CORRECTANSWER thermal shock
A boiler operator's log shall be maintained in each plant containing over: -
CORRECTANSWER 100 Boiler HP
, By definition, a boiler is an open vessel in which water is turned to steam under
pressure by the application of heat. -CORRECTANSWER false
According to state boiler regulations, where should the boiler registration number be
located? -CORRECTANSWER on the front of the boiler
As an operator in a plant you must always be aware of your surroundings. Which of the
following, that should be under the control of the licensed operator, can be extremely
dangerous and cause a catastrophic hazardous event if it is not inspected annually? -
CORRECTANSWER The boiler(s) can be dangerous if not inspected and maintained
properly
The primary purpose of establishing a set of plant safety rules is to: -
CORRECTANSWER protect workers and equipment
The ASME Code states that the setting on the high limit pressure control on a low
pressure steam boiler shall not exceed: -CORRECTANSWER 15 psig
In order to be a good operator one must have basic knowledge on the principles of how
energy works in a steam and hot water system. Which of the statements below is
correct? -CORRECTANSWER in a heating system, in order to change state from a
liquid to a gaseous state heat must be added.
QUESTIONS WITH 100% VERIFIED ANSWERS||
BRAND NEW!!
Where on the Certificate of Inspection would you find the State of New Jersey
jurisdiction number? -CORRECTANSWER upper left corner
Which of the following best describes the combustion chamber of a serpentine tube
heating boiler? -CORRECTANSWER it is located below the tubes
By N.J.A.C. rules, a school with a boiler plant with a total interconnected capacity of 100
BHP would require a properly licensed operator to be present whenever the building
was deemed occupied. -CORRECTANSWER false
Which of the following is not a classification of a hot water system? -
CORRECTANSWER a Hartford loop system
When bringing a steam heating plant on line from a cold start, when the ambient
conditions are about 20 degrees F, what condition are you preventing when the
pressure is increased gradually? -CORRECTANSWER thermal shock
A boiler operator's log shall be maintained in each plant containing over: -
CORRECTANSWER 100 Boiler HP
, By definition, a boiler is an open vessel in which water is turned to steam under
pressure by the application of heat. -CORRECTANSWER false
According to state boiler regulations, where should the boiler registration number be
located? -CORRECTANSWER on the front of the boiler
As an operator in a plant you must always be aware of your surroundings. Which of the
following, that should be under the control of the licensed operator, can be extremely
dangerous and cause a catastrophic hazardous event if it is not inspected annually? -
CORRECTANSWER The boiler(s) can be dangerous if not inspected and maintained
properly
The primary purpose of establishing a set of plant safety rules is to: -
CORRECTANSWER protect workers and equipment
The ASME Code states that the setting on the high limit pressure control on a low
pressure steam boiler shall not exceed: -CORRECTANSWER 15 psig
In order to be a good operator one must have basic knowledge on the principles of how
energy works in a steam and hot water system. Which of the statements below is
correct? -CORRECTANSWER in a heating system, in order to change state from a
liquid to a gaseous state heat must be added.
