1 | Page
OSMOSE PESTICIDE QUIZ QUESTIONS
AND ANSWERS
Shipping papers are designed to? - correct answer- Inform
emergency response personnel of the quantity and types of
Hazardous Materials that are being transported on a particular
vehicle.
Precautionary statements and toxicity categories. - correct
answer- Cat I - Danger (highly toxic) Cat II - Warning
(moderately toxic) Cat III - Caution (slightly toxic) Cat IIII -
(relatively non-toxic)
When should you read the product label? - correct answer-
Always read the product label before using product. Before you
select, buy or use the product. Before applying. After applying if
anything out of the ordinary happens. Before storing or
disposing of the pesticide or pesticide containers.
Types of fumes used. - correct answer- WoodFume. MITC-
Fume. DuraFume.
Depth of hole drilled for MITC-Fume. - correct answer- 12" to
15"
, 2 | Page
Angle drilled for MITC-Fume - correct answer- 45 degrees or
steeper
Where do I start drilling for MITC - correct answer- At ground
level
In the absence of contract specifications, this chart determines
the number or placement of application holes for MITC. -
correct answer- 28" or less- 2 holes beginning at ground line
spaced 90 degrees apart and 6" to 8" inches higher than first
hole. 29" to 35" - 3 holes beginning at ground-line spaced 120
degrees apart and 6" to 8" higher than previous hole. 36" to 49"
- 4 holes beginning at ground line spaced 90 degrees apart and
6 to 8 inches higher than previous hole. 50" to 59" - 5 holes
beginning at ground line spaced 70 degrees apart and 6 to 8
inches higher than previous hole.
Steps to applying MITC-Fume (after drilling hole) - correct
answer- Have on proper PPE. Grab 1 tube at a time. Start at
lowest hole first. Open tube away from face. Place in lowest
hole (open end down). Place MITC tube cap in hole. Plug hole.
SDS (mandatory parts) - correct answer- Identification
OSMOSE PESTICIDE QUIZ QUESTIONS
AND ANSWERS
Shipping papers are designed to? - correct answer- Inform
emergency response personnel of the quantity and types of
Hazardous Materials that are being transported on a particular
vehicle.
Precautionary statements and toxicity categories. - correct
answer- Cat I - Danger (highly toxic) Cat II - Warning
(moderately toxic) Cat III - Caution (slightly toxic) Cat IIII -
(relatively non-toxic)
When should you read the product label? - correct answer-
Always read the product label before using product. Before you
select, buy or use the product. Before applying. After applying if
anything out of the ordinary happens. Before storing or
disposing of the pesticide or pesticide containers.
Types of fumes used. - correct answer- WoodFume. MITC-
Fume. DuraFume.
Depth of hole drilled for MITC-Fume. - correct answer- 12" to
15"
, 2 | Page
Angle drilled for MITC-Fume - correct answer- 45 degrees or
steeper
Where do I start drilling for MITC - correct answer- At ground
level
In the absence of contract specifications, this chart determines
the number or placement of application holes for MITC. -
correct answer- 28" or less- 2 holes beginning at ground line
spaced 90 degrees apart and 6" to 8" inches higher than first
hole. 29" to 35" - 3 holes beginning at ground-line spaced 120
degrees apart and 6" to 8" higher than previous hole. 36" to 49"
- 4 holes beginning at ground line spaced 90 degrees apart and
6 to 8 inches higher than previous hole. 50" to 59" - 5 holes
beginning at ground line spaced 70 degrees apart and 6 to 8
inches higher than previous hole.
Steps to applying MITC-Fume (after drilling hole) - correct
answer- Have on proper PPE. Grab 1 tube at a time. Start at
lowest hole first. Open tube away from face. Place in lowest
hole (open end down). Place MITC tube cap in hole. Plug hole.
SDS (mandatory parts) - correct answer- Identification
