Verified solutions | 2025\2026 Latest!!
1. Where would you look to determine if On the mechanical plan
the damper requirements have been
included and correct on a set of draw-
ings?
2. Which plans sheet gives specific details Electrical plans
for exit signs?
3. Which plan would you look at to find Door schedule
exit door fire ratings?
4. All of the following items can be verified The location of fire hydrant connections
on the life safety floor plan Except
5. Which view should inspectors examine Sectional view
to see a horizontal cross section of the
complete building from exterior wall to
exterior wall and from the foundation
to roof
6. To validate the dimensions on set of Scale
construction drawings, you must check
the
7. Air conditioning systems should be Close off sections of the ductwork if a fire is
equipped with dampers to? detected
8. Inspection requirements for HVAC sys- 90A
tems are found in NFPA
9. Following installation, all vents are sub- An acceptances performance test
ject to an inspection and?
, Fire Inspector II Exam Questions & Answers, | Already Verified Test |10
Verified solutions | 2025\2026 Latest!!
10. Air conditioning systems present Flooding
unique hazards that include all of the
following except
11. According to the national institute of Slight
standards and Technology (NIST), a non
combustible powerhouse has fire load
categorized as
12. Fire load in a building is given in Pounds per square foot or Newton's
13. Gas cabinets and exhausted enclosures Increase the threshold for areas containing com-
are often used to pressed gases
14. In which standard would you find the NFPA 55
MAXIMUM allowable qualities of a com-
pressed gas for specific control area
15. Identify the two types of ventilation re- Normal / Emergency
quirements for all tanks storing flam-
mable and combustible liquids
16. Storage tanks containing class 1 class Pressure treated wood
2 class 3A liquids cannot have supports
made of
17. Emergency drain systems for flamma- Separator
ble or combustible liquids the connect
to public waterways must be equipped
with a trap for
18. The flammable limits for hazardous On the MSDS
chemical can be found
, Fire Inspector II Exam Questions & Answers, | Already Verified Test |10
Verified solutions | 2025\2026 Latest!!
19. The common identification system im- NFPA 704 system
plemented in an area where the materi-
als are regularly stored and used is the
20. Which of the following is an example of Small arms ammunition
an explosive
21. Any material or make sure that con- A blasting agent
tains a fuel and an oxidizer is
22. Requirements for grease removal de- NFPA 96
vice is associated with cooking equip-
ment can be found in
23. Spray area ducks should be made out Steel
of
24. The greatest amount of flammable and 120 gallons
combustible liquids a flammable liquid
storage cabinet in a dipping and coding
area is permitted to hold is
25. Dipping in coding areas must be sepa- Fire partitions
rated from other operations materials
or occupancy by firewalls or
26. Let's go Wayne requirements for spray NFPA 33
areas are specified in
27. When used in reference to fire extin- The walking distance from any hazard to the
guishers, the term "travel distance " nearest fire shank sure meaning the hazard re-
means quirements