EXAM|WITH ACCURATE QUESTIONS AND VERIFIED
ANSWERS|GRADED A
Ideal bromine level in a pool and spa is: Ans✓✓✓ 3ppm to 6ppm
Ideal chorine level for a pool is: Ans✓✓✓ 1ppm to 5ppm
Maximum level of chlorine in a pool is: Ans✓✓✓ 5ppm
If you see bubbles coming up from a return, the possible cause could be
Ans✓✓✓ a bad seal on the hair/lint strainer - it is not properly closed, or
air is in the filter, or water level is too low
The hypochlorinator doesn't work. What could be a possible cause for
this?
a) no chlorine in the vat
b) the injection fitting is clogged
c) the tube assembly needs to be changed
d) all of the above Ans✓✓✓ d) all of the above
You go to the pool in the morning and notice the chlorine is at zero. You
hand-feed chlorine, how long to do you have to wait to allow people to
go into the pool.
a) no time
b) 15 minutes
, c) 30 minutes
d) One day Ans✓✓✓ c) 30 minutes
When doing the pH test and the sample turns yellow, what does it mean?
Ans✓✓✓ pH is too low
When doing the pH test and the sample turns purple, what does it mean?
Ans✓✓✓ pH is too high
What do you do if a patron complains of a chlorine smell and their eyes
are stinging? Ans✓✓✓ Raise the chlorine to Breakpoint Level.
If the telephone at the pool doesn't work Ans✓✓✓ close the pool
What should you use when handling chemicals? Ans✓✓✓ Personal
Protective Equipment - Gloves, Goggles, Apron
What happens if the alkalinity level is too low? Ans✓✓✓ pH is difficult
to maintain, the water will cause damage to the pool walls
ADD CHEMICALS TO WATER; DO NOT ADD WATER TO
CHEMICALS Ans✓✓✓ ...