AVIXA CTS EXAM 2025 COMPREHENSIVE EXAM
QUESTIONS |FREQUENTLY TESTED QUESTIONS
|RECENTLY TESTING REAL EXAM
QUESTIONS|VERIFIED SOLUTIONS (100% CORRECT)
Benchmarking - (ANSWER)______ is the process of comparing methods,
techniques, and principles from peer organizations and facilities.
A client approaches an AV provider with a project requirement to set up an
audiovisual system for their newly constructed conference room. The client
emphasizes the importance of seamless video conferencing capabilities and high-
quality audio output. What would be the MOST appropriate initial step for the AV
provider to take based on the information provided? - (ANSWER)Conduct a needs
analysis
Which term BEST describes the needs analysis process? - (ANSWER)Defining user
needs and desires
What is the term that describes comparing an existing installation with a new
project? - (ANSWER)Benchmarking
What role does the AV professional typically play in conducting a needs analysis? -
(ANSWER)Facilitator of design collaboration
Which statement BEST shows why a needs analysis is important for an AV
project? - (ANSWER)Needs analysis ensures that end-users' requirements are
accurately identified and addressed.
,When establishing initial contact with a client, try to develop a relationship early
on with the _____. - (ANSWER)stakeholders
On a tour of the facility during the preliminary site survey, it was pointed out that
the AV rack closet is 76 m (250 ft) from the room where the multi-purpose room
will be going. Why is that a concern for the AV professional? - (ANSWER)Cat
cables have a distance limitation.
While evaluating a site environment, a room appears to suffer from
reverberation. What treatment could be recommended to improve the acoustics
in the room - (ANSWER)Use soft furnishings and flooring
Prior to performing a site assessment and new system design the ______ should
be identified. - (ANSWER)client's needs and intended uses
During an initial site survey, it is noted that there are no window treatments on
the windows of the planned project room, potentially causing excessive glare.
What should be done to address this issue? - (ANSWER)Recommend installing
window treatments to the client to mitigate glare issues.
Common measurements used in AV for seated and standing eye and ear heights
are: - (ANSWER)In AV system design, standard measurements are used as
reference points:
Seated eye/ear height: 1.2 m (48 inches)
Standing eye/ear height: 1.7 m (68 inches)
,What is the primary purpose of conducting an initial site survey for an AV project?
- (ANSWER)To gather information about the physical space and logistical
considerations.
Projectors may use different lamp technologies for different reasons. For long life
without changing the light source, which technology is preferred? - (ANSWER)LED
lamp
During the stakeholder meeting to present the program report, the AV Sales
Manager realizes that some stakeholders have questions beyond the scope of the
report. What should the manager do? - (ANSWER)Address the additional
questions and assure stakeholders that their concerns will be considered.
What distinguishes a section cut drawing from an elevation drawing? -
(ANSWER)A section cut shows the ceiling above and the floor below; an elevation
provides a view of the vertical surface (not a top-down view)
Section Cut Drawing: Shows a vertical slice through a building, revealing the
interior construction including ceiling, walls, and floor as if the building were cut
through. It's like looking at the building that has been sliced vertically, showing
what's inside the walls, ceiling construction, and floor composition
What's an elevation drawing - (ANSWER)Elevation Drawing: Shows the vertical
face or façade of a wall or surface (interior or exterior) as a 2D representation. It's
a head-on view of a vertical surface without showing what's inside or behind it.
, After presenting a proposal to a client, confirming that all objections are
answered and that the final buying decision will be made at an internal meeting,
what is the next step? - (ANSWER)Communicate regularly, until a decision is
made
Which of the following statements accurately describes the purpose of compiling
information for an AV project scope? - (ANSWER)To ensure the proposed system
meets the needs of stakeholders.
The client delivers building schematics in US customary measurements. Which
ratio will help you convert them to metric measurements? - (ANSWER)1:25.40
This ratio represents the conversion from inches to millimeters. One inch equals
25.4 millimeters, which is the standard conversion factor used when converting
between US customary (imperial) measurements and metric measurements.
When working with building schematics:
If a dimension is given as 1 inch on a US customary drawing, you would multiply
by 25.4 to get 25.4 millimeters
Similarly, a measurement of 12 inches (1 foot) would convert to 304.8 millimeters
What should the specific capabilities of the AV systems defined in the Program
Report be based on? - (ANSWER)Identified needs of the end user.
Which is NOT presented in the program report: - (ANSWER)Detailed list of
equipment
QUESTIONS |FREQUENTLY TESTED QUESTIONS
|RECENTLY TESTING REAL EXAM
QUESTIONS|VERIFIED SOLUTIONS (100% CORRECT)
Benchmarking - (ANSWER)______ is the process of comparing methods,
techniques, and principles from peer organizations and facilities.
A client approaches an AV provider with a project requirement to set up an
audiovisual system for their newly constructed conference room. The client
emphasizes the importance of seamless video conferencing capabilities and high-
quality audio output. What would be the MOST appropriate initial step for the AV
provider to take based on the information provided? - (ANSWER)Conduct a needs
analysis
Which term BEST describes the needs analysis process? - (ANSWER)Defining user
needs and desires
What is the term that describes comparing an existing installation with a new
project? - (ANSWER)Benchmarking
What role does the AV professional typically play in conducting a needs analysis? -
(ANSWER)Facilitator of design collaboration
Which statement BEST shows why a needs analysis is important for an AV
project? - (ANSWER)Needs analysis ensures that end-users' requirements are
accurately identified and addressed.
,When establishing initial contact with a client, try to develop a relationship early
on with the _____. - (ANSWER)stakeholders
On a tour of the facility during the preliminary site survey, it was pointed out that
the AV rack closet is 76 m (250 ft) from the room where the multi-purpose room
will be going. Why is that a concern for the AV professional? - (ANSWER)Cat
cables have a distance limitation.
While evaluating a site environment, a room appears to suffer from
reverberation. What treatment could be recommended to improve the acoustics
in the room - (ANSWER)Use soft furnishings and flooring
Prior to performing a site assessment and new system design the ______ should
be identified. - (ANSWER)client's needs and intended uses
During an initial site survey, it is noted that there are no window treatments on
the windows of the planned project room, potentially causing excessive glare.
What should be done to address this issue? - (ANSWER)Recommend installing
window treatments to the client to mitigate glare issues.
Common measurements used in AV for seated and standing eye and ear heights
are: - (ANSWER)In AV system design, standard measurements are used as
reference points:
Seated eye/ear height: 1.2 m (48 inches)
Standing eye/ear height: 1.7 m (68 inches)
,What is the primary purpose of conducting an initial site survey for an AV project?
- (ANSWER)To gather information about the physical space and logistical
considerations.
Projectors may use different lamp technologies for different reasons. For long life
without changing the light source, which technology is preferred? - (ANSWER)LED
lamp
During the stakeholder meeting to present the program report, the AV Sales
Manager realizes that some stakeholders have questions beyond the scope of the
report. What should the manager do? - (ANSWER)Address the additional
questions and assure stakeholders that their concerns will be considered.
What distinguishes a section cut drawing from an elevation drawing? -
(ANSWER)A section cut shows the ceiling above and the floor below; an elevation
provides a view of the vertical surface (not a top-down view)
Section Cut Drawing: Shows a vertical slice through a building, revealing the
interior construction including ceiling, walls, and floor as if the building were cut
through. It's like looking at the building that has been sliced vertically, showing
what's inside the walls, ceiling construction, and floor composition
What's an elevation drawing - (ANSWER)Elevation Drawing: Shows the vertical
face or façade of a wall or surface (interior or exterior) as a 2D representation. It's
a head-on view of a vertical surface without showing what's inside or behind it.
, After presenting a proposal to a client, confirming that all objections are
answered and that the final buying decision will be made at an internal meeting,
what is the next step? - (ANSWER)Communicate regularly, until a decision is
made
Which of the following statements accurately describes the purpose of compiling
information for an AV project scope? - (ANSWER)To ensure the proposed system
meets the needs of stakeholders.
The client delivers building schematics in US customary measurements. Which
ratio will help you convert them to metric measurements? - (ANSWER)1:25.40
This ratio represents the conversion from inches to millimeters. One inch equals
25.4 millimeters, which is the standard conversion factor used when converting
between US customary (imperial) measurements and metric measurements.
When working with building schematics:
If a dimension is given as 1 inch on a US customary drawing, you would multiply
by 25.4 to get 25.4 millimeters
Similarly, a measurement of 12 inches (1 foot) would convert to 304.8 millimeters
What should the specific capabilities of the AV systems defined in the Program
Report be based on? - (ANSWER)Identified needs of the end user.
Which is NOT presented in the program report: - (ANSWER)Detailed list of
equipment
