MK1 SWE EXAM 2025 QUESTIONS AND
ANSWERS
What are two types of maintenance - ANS Corrective and preventative
What article always captain to conduct NJP - ANS Article 15
Where two types of procedures that may be accessed from maintenance procedure option -
ANS Official and local
Who is authorized to conduct tag outs - ANS Authorizing officer
Out of calibration tags should be used when - ANS When indicating parameter errors are
small and consistent
For modernized units the boat inspection reports are to be entered through - ANS Almis/
EALpage
Cutter engineering report shall be completed in accordance with - ANS Naval engineering
manual chapter 90
On an MPC the warning shall come where in the text - ANS Before the instruction
On an MPC what would constitute an expendable - ANS Rags
1 Copyright ©2025 BRAINBARTER ALL RIGHTS RESERVED
, PMS that does not need to be included in the cutter engineering report is - ANS Daily and
weekly
With regards to casreps what is mandatory on all updates corrects and cancellations -
ANS REF
Which unit besides a shore unit are exempt from filling out the POSIT line - ANS Cutter
underway
A casrep it should be made as soon as possible no later than ____hours - ANS 24
Casualties that effect a secondary mission should always have a casualty category of - ANS 2
AMPN is mandatory after any set that contains an entry of? - ANS Other, tech, none
In a 1PARTSID if the NIIN is not known what needs to be put in the line - ANS Unknown
What is the criteria for submitting CASCOR - ANS The delay expressed an hours, and
correcting the casualty due to parts unavailability, a list of all parts requested and dates
received; the total number of man-hours expanded; the number of equipment hours since last
failure
You find something else wrong with the piece of equipment that has already been CASREP'd
you should send an? - ANS Update
Where do you find the hierarchy of guidance for specification plans - ANS NEM chapter 41
Which specifications may be used as a guided researching propose engineering changes and
solutions - ANS GSO
2 Copyright ©2025 BRAINBARTER ALL RIGHTS RESERVED
ANSWERS
What are two types of maintenance - ANS Corrective and preventative
What article always captain to conduct NJP - ANS Article 15
Where two types of procedures that may be accessed from maintenance procedure option -
ANS Official and local
Who is authorized to conduct tag outs - ANS Authorizing officer
Out of calibration tags should be used when - ANS When indicating parameter errors are
small and consistent
For modernized units the boat inspection reports are to be entered through - ANS Almis/
EALpage
Cutter engineering report shall be completed in accordance with - ANS Naval engineering
manual chapter 90
On an MPC the warning shall come where in the text - ANS Before the instruction
On an MPC what would constitute an expendable - ANS Rags
1 Copyright ©2025 BRAINBARTER ALL RIGHTS RESERVED
, PMS that does not need to be included in the cutter engineering report is - ANS Daily and
weekly
With regards to casreps what is mandatory on all updates corrects and cancellations -
ANS REF
Which unit besides a shore unit are exempt from filling out the POSIT line - ANS Cutter
underway
A casrep it should be made as soon as possible no later than ____hours - ANS 24
Casualties that effect a secondary mission should always have a casualty category of - ANS 2
AMPN is mandatory after any set that contains an entry of? - ANS Other, tech, none
In a 1PARTSID if the NIIN is not known what needs to be put in the line - ANS Unknown
What is the criteria for submitting CASCOR - ANS The delay expressed an hours, and
correcting the casualty due to parts unavailability, a list of all parts requested and dates
received; the total number of man-hours expanded; the number of equipment hours since last
failure
You find something else wrong with the piece of equipment that has already been CASREP'd
you should send an? - ANS Update
Where do you find the hierarchy of guidance for specification plans - ANS NEM chapter 41
Which specifications may be used as a guided researching propose engineering changes and
solutions - ANS GSO
2 Copyright ©2025 BRAINBARTER ALL RIGHTS RESERVED
