NCIDQ (IDPX) Exam Questions And
Answers
48" -
correct answer ✅The high forward reach shall be __ maximum
where the reach depth is 20 inches (510 mm) maximum.
44", 25" -
correct answer ✅Where the reach depth exceeds 20 inches (510
mm), the high forward reach shall be ___ maximum and the reach
depth shall be ___ maximum.
Specifically when napped, tufted, or looped textiles are used as
"wallcoverings" on walls and ceilings. -
correct answer ✅The "Room Corner Test" or NFPA 265/UL 1715
typical addresses what fabric situation?
Vertical Flame Test, NFPA 701/ASTM6413 -
correct answer ✅tests vertical treatments such as curtains,
draperies, window shades, large wall hangings or tapestries, and
plastic films used for decorative purposes.
Smolder resistance test/cigarette ignition test, NFPA 260/ASTM
E1353/CAL 117 -
correct answer ✅__ tests how a product will smolder before either
,NCIDQ (IDPX) Exam Questions And
Answers
flaming or extinguishing an actual smoldering cigarette as the
ignition source.
Steiner tunnel test, ASTM E84/UL 723 -
correct answer ✅tests both the flame spread and smoke
development ratings in the classification of interior finishes applied
to walls, ceilings, and other structural elements.
2-
correct answer ✅For an assembly space, any occupant load over
49 requires __ exits
501-1000 -
correct answer ✅Three exits are required for any space when the
occupant load is between ___ occupants.
greater than 1000 -
correct answer ✅Four exits or exit access doorways shall be
provided from any space with an occupant load ___
the actual area to accommodate specific functions -
correct answer ✅What is included in the net area of a building?
,NCIDQ (IDPX) Exam Questions And
Answers
F-
correct answer ✅T/F: Net area includes primary and secondary
circulation space, closets, electrical and telephone equipment
rooms, exterior walls, or the building core.
T-
correct answer ✅T/F: The net area does not include incidental
space - interior walls and building columns. Sometimes the net area
is referred to as the net assignable area and the secondary spaces
are referred to as the unassigned areas.
Most important use for safety glass -
correct answer ✅swinging doors, storm doors, or when the
bottom edge of the pane is less than 18" above the door
safety glass is required -
correct answer ✅Because the bottom edge of the window pane is
lower than 18″ AFF, ...
, NCIDQ (IDPX) Exam Questions And
Answers
exit discharge -
correct answer ✅The lobby of a building from the stair enclosure
to the exterior door is called:
exit discharge -
correct answer ✅is the part of egress between the exit and public
way.
exit and public way -
correct answer ✅Exit discharge is the part of egress between the
__ and __
48" -
correct answer ✅Standard mounting height for light switches is
occupant load -
correct answer ✅Which is used to determine the number of exits
required in a space?
building comissioning -
correct answer ✅For an interior design project, which of the
following involves verifying and ensuring that the building elements
Answers
48" -
correct answer ✅The high forward reach shall be __ maximum
where the reach depth is 20 inches (510 mm) maximum.
44", 25" -
correct answer ✅Where the reach depth exceeds 20 inches (510
mm), the high forward reach shall be ___ maximum and the reach
depth shall be ___ maximum.
Specifically when napped, tufted, or looped textiles are used as
"wallcoverings" on walls and ceilings. -
correct answer ✅The "Room Corner Test" or NFPA 265/UL 1715
typical addresses what fabric situation?
Vertical Flame Test, NFPA 701/ASTM6413 -
correct answer ✅tests vertical treatments such as curtains,
draperies, window shades, large wall hangings or tapestries, and
plastic films used for decorative purposes.
Smolder resistance test/cigarette ignition test, NFPA 260/ASTM
E1353/CAL 117 -
correct answer ✅__ tests how a product will smolder before either
,NCIDQ (IDPX) Exam Questions And
Answers
flaming or extinguishing an actual smoldering cigarette as the
ignition source.
Steiner tunnel test, ASTM E84/UL 723 -
correct answer ✅tests both the flame spread and smoke
development ratings in the classification of interior finishes applied
to walls, ceilings, and other structural elements.
2-
correct answer ✅For an assembly space, any occupant load over
49 requires __ exits
501-1000 -
correct answer ✅Three exits are required for any space when the
occupant load is between ___ occupants.
greater than 1000 -
correct answer ✅Four exits or exit access doorways shall be
provided from any space with an occupant load ___
the actual area to accommodate specific functions -
correct answer ✅What is included in the net area of a building?
,NCIDQ (IDPX) Exam Questions And
Answers
F-
correct answer ✅T/F: Net area includes primary and secondary
circulation space, closets, electrical and telephone equipment
rooms, exterior walls, or the building core.
T-
correct answer ✅T/F: The net area does not include incidental
space - interior walls and building columns. Sometimes the net area
is referred to as the net assignable area and the secondary spaces
are referred to as the unassigned areas.
Most important use for safety glass -
correct answer ✅swinging doors, storm doors, or when the
bottom edge of the pane is less than 18" above the door
safety glass is required -
correct answer ✅Because the bottom edge of the window pane is
lower than 18″ AFF, ...
, NCIDQ (IDPX) Exam Questions And
Answers
exit discharge -
correct answer ✅The lobby of a building from the stair enclosure
to the exterior door is called:
exit discharge -
correct answer ✅is the part of egress between the exit and public
way.
exit and public way -
correct answer ✅Exit discharge is the part of egress between the
__ and __
48" -
correct answer ✅Standard mounting height for light switches is
occupant load -
correct answer ✅Which is used to determine the number of exits
required in a space?
building comissioning -
correct answer ✅For an interior design project, which of the
following involves verifying and ensuring that the building elements
