1|Page
ALBERTA WELDING FIRST YEAR FINAL AIT EXAM
LATEST 2025 ACTUAL EXAM WITH COMPLETE
QUESTIONS AND CORRECT DETAILED ANSWERS
(100% VERIFIED ANSWERS) |ALREADY GRADED A+|
||SURE PASS!!!|| ||BRANDNEW!!!||
A Material Safety Data Sheet must be reviewed whenever
new information becomes available or at least how often?
- Answer-every three years
What is the total number of hours of work experience,
including technical training, required per year in the
Welder Apprenticeship Program? - Answer-1800
Voltage-sensing wire feeders set their speed according to:
- Answer-arc voltage.
How much electrode stickout is recommended when using
gas shielded FCAW with 1.2 mm (0.045") wire? - Answer-
10 mm to 19 mm (3/8" to 3/4")
One of the main functions of the contact tube is to: -
Answer-transfer current to the electrode.
, 2|Page
Flame propagation means the speed at which the fuel gas
will travel - Answer-False
What height limitation is in place when using freestanding
scaffolding? - Answer-For free standing scaffolds, the
scaffold must not be taller than three (3) times its smallest
dimension in height
The best reference point for dimensioning on pressure
vessels is the: - Answer-datum line
Which of the following is an abbreviation of a Non
destructive test ? - Answer-UT
In common fabricating practice, there are how many basic
joint types? - Answer-5
Single "V" butt joints are used on material thicknesses of: -
Answer-3/8" -1" (9.5 -25.4mm)
ALBERTA WELDING FIRST YEAR FINAL AIT EXAM
LATEST 2025 ACTUAL EXAM WITH COMPLETE
QUESTIONS AND CORRECT DETAILED ANSWERS
(100% VERIFIED ANSWERS) |ALREADY GRADED A+|
||SURE PASS!!!|| ||BRANDNEW!!!||
A Material Safety Data Sheet must be reviewed whenever
new information becomes available or at least how often?
- Answer-every three years
What is the total number of hours of work experience,
including technical training, required per year in the
Welder Apprenticeship Program? - Answer-1800
Voltage-sensing wire feeders set their speed according to:
- Answer-arc voltage.
How much electrode stickout is recommended when using
gas shielded FCAW with 1.2 mm (0.045") wire? - Answer-
10 mm to 19 mm (3/8" to 3/4")
One of the main functions of the contact tube is to: -
Answer-transfer current to the electrode.
, 2|Page
Flame propagation means the speed at which the fuel gas
will travel - Answer-False
What height limitation is in place when using freestanding
scaffolding? - Answer-For free standing scaffolds, the
scaffold must not be taller than three (3) times its smallest
dimension in height
The best reference point for dimensioning on pressure
vessels is the: - Answer-datum line
Which of the following is an abbreviation of a Non
destructive test ? - Answer-UT
In common fabricating practice, there are how many basic
joint types? - Answer-5
Single "V" butt joints are used on material thicknesses of: -
Answer-3/8" -1" (9.5 -25.4mm)
