Guide 9th Edition
What is the primary role of a sterile processing technician? *** To ensure the sterilization and
cleanliness of medical instruments
What does the term "asepsis" mean? *** Free from infection or infectious material
Which body system is most relevant to understanding the sterilization needs of surgical instruments?
*** Skeletal system
Which type of microorganism is commonly associated with hospital-acquired infections (HAIs)? ***
Bacteria
Which organization is responsible for setting standards for sterile processing? *** AAMI
What is the first step in the decontamination process at the point of use? *** Rinsing with water
What is the primary goal of the cleaning process? *** Removal of visible soil and contaminants
What is the difference between high-level disinfection and low-level disinfection? *** High-level
disinfection kills all microorganisms; low-level disinfection does not
Which type of surgical instrument is used to hold tissue? *** Forceps
What is a common issue with complex surgical instruments that technicians must monitor? ***
Mechanical failure
,What is the most common method of high-temperature sterilization? *** Steam
Which method of low-temperature sterilization is often used for heat-sensitive instruments? ***
Ethylene oxide
Which system is commonly used to track instruments and sterilization cycles? *** Instrument Tracking
System (ITS)
Why is continuing education important for sterile processing technicians? *** To keep updated with the
latest practices and technologies
A surgical instrument set is needed urgently, but the standard sterilization cycle takes 30 minutes.
Which method should you use? *** Immediate-use sterilization
During a routine inspection, you notice a small crack in a surgical instrument. What should you do? ***
Report it and remove it from service for repair or replacement
You are preparing an instrument set for a surgery that involves a high risk of infection. Which type of
sterilization should you choose? *** Steam sterilization
A coworker fails to wear gloves while handling contaminated instruments. What is the best course of
action? *** Remind the coworker about the importance of PPE
An instrument package is wet after sterilization. What should you do? *** Repack and resterilize the
instruments
You receive a new type of surgical instrument with unfamiliar components. What should you do first?
*** Refer to the manufacturer's instructions for use (IFU)
,What is a biological indicator? *** A preparation of living spores resistant to the sterilizing agent
What is the purpose of a chemical indicator on a package? *** To differentiate between sterilized and
unsterilized items
What are some devices that monitor the functions of sterilizers? *** Gauges, thermometers, timers,
and/or recorders
What parameter affects all other dependent parameters in ethylene oxide sterilization? *** Gas
concentration
What is the basis of the steam sterilization process? *** Direct saturated steam contact with items to be
sterilized
What sterilization method is used for items that are heat or moisture sensitive? *** Ethylene oxide
sterilization
What is the purpose of adding moisture to heat during sterilization? *** To hasten the process of
thermal destruction of microbial life
Which type of microorganism is the most resistant of all living organisms? *** Bacterial spores
What are recipe cards used for in the assembly and packaging process? *** To provide instructions for
assembling each set or tray
What should be inspected on instruments after cleaning before they are packaged for reuse or storage?
*** The surface and crannies for gross soil, jaws and teeth of hinged instruments, sharpness of cutting
edges
, What is the purpose of the ultrasonic washer in the decontamination process? *** To remove fine soil
from surgical instruments after manual cleaning and before sterilization
What is the purpose of the Decontamination Area in a Sterile Processing Department? *** To clean and
decontaminate reusable equipment, instruments, and supplies
What happens to items after assembly or sterilization in a Sterile Processing Department? *** They are
transferred to the sterile storage area
What are the major functions carried out in the distribution area? *** Case cart preparation and
delivery, exchange cart inventory, telephone-order and requisition-order filling, and patient care
equipment delivery
Prior to the establishment of the Sterile Processing Department, where were medical/surgical supplies
processed and maintained? *** In the patient care areas in which they were to be used
What are the four major areas in a Sterile Processing Department? *** Decontamination, Assembly and
Sterile Processing, Sterile Storage, and Distribution
What is the significance of the last two letters of a singular suffix in medical terminology? *** They
determine the plural form of the word
How are medical terms with multiple roots constructed? *** By using multiple roots with a combining
vowel in between
What is the function of a suffix in a medical term? *** To define whether the word is a noun, verb, or
adjective
What is the purpose of a prefix in a medical term? *** To indicate a location, direction, type, quality, or
quantity