mtm test study questions with accurate answers
____ misalignment occurs when two shafts are parallel to each other but
the face of the pulleys or sprockets are not on the same axis Ans✓✓✓
offset
_____ damage occurs when continual impacting forces such as vibration
are passed from one ring to the other through the rolling elements when
there is no rotation. Ans✓✓✓ false brenell
_____ is defined as the point where both gears transfer power Ans✓✓✓
pitch diameter
_____ is simply the distance that is measured from one tooth to the exact
same point on the next Ans✓✓✓ pitch
_____ is the flaking away of metal pieces due to metal fatigue
Ans✓✓✓ spalling
_____ misalignment exist when two shafts are not parallel to each other
Ans✓✓✓ non parallel
_____ misalignment occurs when two shafts are parallel to each other
but are at a different angle with the horizontal plane Ans✓✓✓ angular
, _____is a bonding, shearing and tearing away of metal from two
contacting or sliding metals Ans✓✓✓ gouging
a _____ bearing is usually a sleeve or bushing that may support radial
and axial loads Ans✓✓✓ plain
a _____ may be a driver gear or driven gear depending on the use of the
gears Ans✓✓✓ pinion gear
a pipe in a horizontal position on rollers what position are you welding
in Ans✓✓✓ flat position or 1G
after installing regulators hoses torches Etc you should Ans✓✓✓ check
for leaks
air arcing is a process that can be used to Ans✓✓✓ remove welds
an anti-friction bearing would typically need to be _____ into position
Ans✓✓✓ heated
Arrow pointed at a downward angle triangle on bottom Ans✓✓✓ fillet
weld on that side (continuous if no number specified)
Arrow pointed at downward angle triangle on top Ans✓✓✓ fillit weld
on opposite side (continuous if no numbers)
____ misalignment occurs when two shafts are parallel to each other but
the face of the pulleys or sprockets are not on the same axis Ans✓✓✓
offset
_____ damage occurs when continual impacting forces such as vibration
are passed from one ring to the other through the rolling elements when
there is no rotation. Ans✓✓✓ false brenell
_____ is defined as the point where both gears transfer power Ans✓✓✓
pitch diameter
_____ is simply the distance that is measured from one tooth to the exact
same point on the next Ans✓✓✓ pitch
_____ is the flaking away of metal pieces due to metal fatigue
Ans✓✓✓ spalling
_____ misalignment exist when two shafts are not parallel to each other
Ans✓✓✓ non parallel
_____ misalignment occurs when two shafts are parallel to each other
but are at a different angle with the horizontal plane Ans✓✓✓ angular
, _____is a bonding, shearing and tearing away of metal from two
contacting or sliding metals Ans✓✓✓ gouging
a _____ bearing is usually a sleeve or bushing that may support radial
and axial loads Ans✓✓✓ plain
a _____ may be a driver gear or driven gear depending on the use of the
gears Ans✓✓✓ pinion gear
a pipe in a horizontal position on rollers what position are you welding
in Ans✓✓✓ flat position or 1G
after installing regulators hoses torches Etc you should Ans✓✓✓ check
for leaks
air arcing is a process that can be used to Ans✓✓✓ remove welds
an anti-friction bearing would typically need to be _____ into position
Ans✓✓✓ heated
Arrow pointed at a downward angle triangle on bottom Ans✓✓✓ fillet
weld on that side (continuous if no number specified)
Arrow pointed at downward angle triangle on top Ans✓✓✓ fillit weld
on opposite side (continuous if no numbers)
