ACU FUSION 360 PRACTICE EXAM 2
2025 QUESTIONS AND ANSWERS
Create a New Design from File using Dimension.f3d
Dimension the rectangle.
Change the 61.275 dimension to 62.375
What is the area? - ....ANSWER ...-2471.609 Sq mm
Create a New Design from File using Sweep.f3d
Create a sweep using the spline as the path.
Use 5 mm circle for profile of sweep.
What is volume of the sweep? - ....ANSWER ...-5572.129 mm^3
Create a New Design from File using Loft.f3d
Loft the sketches.
What Is the surface area of the highlighted surface? - ....ANSWER ...-2324.113
mm^2
In the Title Block, in the Drawing Workspace, how do you edit the Document Status? -
....ANSWER ...-Double-click the Title Block; in the Title Block window, type the
change into the Document status field.
....FOR STUDY PURPOSES...©️2025 ALL RIGHTS RESERVED... 1
, Which of the following is not a style when editing a projected view? -
....ANSWER ...-Hidden Edges
Which of the following is not a way to convert a Body into a Component? -
....ANSWER ...-In the Modify dropdown menu, select Split Body, select the Body,
then in the Split Body window select the Split in Components Tool, then click OK.
Update the model using parameters:
wheel_dia = 56 mm
wheel_width = 15 mm
hub_dia = 12 mm
What is the mass of the model after the changes are made? - ....ANSWER ...-
127.537 grams
Begin a new 5 mm thick component based on the profile sketch.
What is the volume of the new component? - ....ANSWER ...-1906.023 mm^3
Use Section Plane 2 to create a sketch that includes the edges of the existing part as the
plane passes through it.
What is the area of the geometry added to the sketch? - ....ANSWER ...-247.122
mm^2
Add a .5 mm fillet to all of the inside edges.
Add a 1 mm round to all of the external edges above the bottom face.
Note: Do not modify threaded holes.
What is the new mass of this component in grams? - ....ANSWER ...-44.644 grams
....FOR STUDY PURPOSES...©️2025 ALL RIGHTS RESERVED... 2
2025 QUESTIONS AND ANSWERS
Create a New Design from File using Dimension.f3d
Dimension the rectangle.
Change the 61.275 dimension to 62.375
What is the area? - ....ANSWER ...-2471.609 Sq mm
Create a New Design from File using Sweep.f3d
Create a sweep using the spline as the path.
Use 5 mm circle for profile of sweep.
What is volume of the sweep? - ....ANSWER ...-5572.129 mm^3
Create a New Design from File using Loft.f3d
Loft the sketches.
What Is the surface area of the highlighted surface? - ....ANSWER ...-2324.113
mm^2
In the Title Block, in the Drawing Workspace, how do you edit the Document Status? -
....ANSWER ...-Double-click the Title Block; in the Title Block window, type the
change into the Document status field.
....FOR STUDY PURPOSES...©️2025 ALL RIGHTS RESERVED... 1
, Which of the following is not a style when editing a projected view? -
....ANSWER ...-Hidden Edges
Which of the following is not a way to convert a Body into a Component? -
....ANSWER ...-In the Modify dropdown menu, select Split Body, select the Body,
then in the Split Body window select the Split in Components Tool, then click OK.
Update the model using parameters:
wheel_dia = 56 mm
wheel_width = 15 mm
hub_dia = 12 mm
What is the mass of the model after the changes are made? - ....ANSWER ...-
127.537 grams
Begin a new 5 mm thick component based on the profile sketch.
What is the volume of the new component? - ....ANSWER ...-1906.023 mm^3
Use Section Plane 2 to create a sketch that includes the edges of the existing part as the
plane passes through it.
What is the area of the geometry added to the sketch? - ....ANSWER ...-247.122
mm^2
Add a .5 mm fillet to all of the inside edges.
Add a 1 mm round to all of the external edges above the bottom face.
Note: Do not modify threaded holes.
What is the new mass of this component in grams? - ....ANSWER ...-44.644 grams
....FOR STUDY PURPOSES...©️2025 ALL RIGHTS RESERVED... 2
