AND ANSWERS
What are the two main standard that cover mobile cranes? - ANS Osha and ASME
The first concern of the operator should always be: - ANS safety
Whenever the operator has doubt as to the safety of the lift they should ______ and report to
______ who can address concerns and restart the lift - ANS stop/ lift director
The Mobile Crane Operator Certification Program offered by NCCER has been accredited by; -
ANS ANSI
Per the OSHA requirements, a cranes operators certification is valid for? - ANS 5 years
True or false: Certified operators must take only the written assessment again every five years
to retain their certification - ANS False
What are they three basic types of cranes? - ANS Mobile, tower, overhead
the distinct feature of mobile cranes is that they are: - ANS they can travel
Crawler Cranes are named for their slow moving tracks called crawler frames or? - ANS tread
members
COPYRIGHT © 2025 BRAINBARTER ALL RIGHTS RESERVED 1
, Cranes with rotating controls ______ Crane with stationary controls _____ - ANS Swing
cab/fixed cab
T or F: it is not necessary for outriggers to remove all weight from tires. - ANS FALSE
How should telescopic boom sections be extended? - ANS manufactures specs
what is the lower section of boom that doesn't extend? - ANS base section
Most load chart ratings require the crane to be? - ANS properly leveled within 1%
Cranes working circle based on booms position in relation to carrier body? - ANS quadrants
Most carrier mounted cranes have their greatest capacity where? - ANS over the rear
manufacturers reduce tipping loads on outriggers _____ on rubber _____ - ANS 85%/75%
when making a lift the center of gravity of the load should be - ANS directly under bottom tip
Side loading is a major cause of what? - ANS Boom Collapse
crane operators should follow ______ guidance related to wind. - ANS crane manufactors
When traveling with load boom should be ___________ load should be _______ - ANS short
as possible/close to the ground
COPYRIGHT © 2025 BRAINBARTER ALL RIGHTS RESERVED 2