Chapter 10 Textbook Inspection Concepts and Technique questions and correct answers

Chapter 10 Textbook Inspection Concepts
and Technique questions and correct answers

Before starting an inspection be sure - answer-All plates, access doors, fairings, and
v v v v v v v v v v v v


cowling has been open or removed and the structure cleaned.
v v v v v v v v v v




Before cleaning the aircraft what should you take note of? - answer-Any oil or leakage
v v v v v v v v v v v v v v


because this will all be washed away in cleaning and you will never have known it was
v v v v v v v v v v v v v v v v v


there.
v




The checklist for inspection should include the following - answer-Fuselage and hull
v v v v v v v v v v v


group
v


Cabin and cockpit group
v v v


Engine and nacelle group
v v v


Landing gear group v v


Wing and center section
v v v


Empennage group v


Propeller group v


Communication and navigation group v v v


Miscellaneous group v




Areonautical publications are the - answer-Sources of information for guiding aviation
v v v v v v v v v v


mechanics in the operation and maintenance of aircraft and related equipment
v v v v v v v v v v v




Areonautical publications include - answer-Manufacturer's SB
v v v v v


Manuals
Catalogs
CFRs
ADs
ACs
TCDS

SBs - answer-Are recomendation of repair that are not mandated. These are sent out to
v v v v v v v v v v v v v v


aircraft owners and include the type of work to be done, what component, detailed
v v v v v v v v v v v v v v


instructions for service, source of parts, and estimated man hours.
v v v v v v v v v v




Maintenance Manual - answer-Contains information for the mechanic who normally
v v v v v v v v v


works on components, assemblies, and systems while they are installed in the aircraft.
v v v v v v v v v v v v v

, A typical maintenance manual contains the following: - answer-A description of the
v v v v v v v v v v v


vsystem
Lubrication instructions v


Pressures and electrical loads specific to systems
v v v v v v


Tolerances and adjustments necessary for proper functioning of the airplane
v v v v v v v v v v


Methods of leveling, raising, and towing
v v v v v


Methods of balancing control surfaces
v v v v v


Identification of primary and secondary structures v v v v v


Frequency and extent of inspections necessary to the proper operation of the airplane
v v v v v v v v v v v v v


Special repair methods applicable to the airplane
v v v v v v v


Special inspection techniques requiring X Ray ultrasonic or magnetic particle inspection
v v v v v v v v v v v


A list of special tools
v v v v




Overhaul Manual - answer-Contains brief detailed step by step instructions covering
v v v v v v v v v v


work normally performed on a unit that has been removed from the aircraft
v v v v v v v v v v v v v




Structural Repair Manual - answer-Manufacturers information and specific instructions
v v v v v v v v


for repairing primary and secondary structures. Typical skin, frame, rib, and stringer
v v v v v v v v v v v v


repairs are covered in this manual.
v v v v v v




Illustrated Parts Catalog - answer-Presents component breakdowns of structure and
v v v v v v v v v


vequipment in disassembly sequence. Also included are exploded views or cutaway
v v v v v v v v v v


villustrations for all parts and equipment manufactured by this aircraft manufacturer
v v v v v v v v v v




Code of Federal Regulations (CFR) - answer-Established by law to provide for safe and
v v v v v v v v v v v v v


orderly conduct of flight operations and to prescribe airman privileges and limitations
v v v v v v v v v v v v




Airworthiness Directives (ADs) - answer-Notify aircraft owners of unsafe conditions that
v v v v v v v v v v


may exist because of design defects, maintenance.
v v v v v v v




2 categories of airworthiness directives - answer-Emergency - those of an emergency
v v v v v v v v v v v


nature requiring immediate compliance upon reciept
v v v v v v




Less Urgent - Those of a less urgent nature requiring compliance within a relatively
v v v v v v v v v v v v v


longer period of time
v v v v




Type Certificate Data Sheet - answer-Describes the type design and sets forth the
v v v v v v v v v v v v


limitations prescribed by the applicable CFR part.
v v v v v v v




Who is responsible for making sure before each flight an aircraft is in a condition for a
v v v v v v v v v v v v v v v v


safe flight? - answer-The pilot in command (PIC)
v v v v v v v v




Detailed inspections must be conducted by aviation maintenance technicians at least
v v v v v v v v v v


once each - answer-12 calendar months while inspection is required for others after
v v v v v v v v v v v v v


each 100 hours of flight. This is dependent upon their for lease for higher status
v v v v v v v v v v v v v v v