Electrical Level 3 - Module 10 Questions
with Correct Answers | Rated A+
The video cable used in new installations is normally - CORRECT ANSWER -RG6
A structured cabling subsystem that connects buildings together in a multi-building
environment is call a - CORRECT ANSWER -Campus Backbone Subsystem
Straight conduit runs used in campus backbone systems should have pull boxes installed no
more than - CORRECT ANSWER -140' (43m) Apart
Label conduit for a campus backbone within - CORRECT ANSWER -6" (150 mm) Of The
Termination Point
Telecom cables in an ER or TR subsystem must be separated from electrical conduit or cable by
at least - CORRECT ANSWER -12" (300 mm)
Riser pathways should run perpendicular to fluorescent lighting and be separated by a distance
of least - CORRECT ANSWER -5" (125 mm)
Vertical cabling spans exceeding 30' (9 m) in riser support subsystems must be supported in -
CORRECT ANSWER -30' (9 m)
When installing horizontal ER / TR / MC sleeves, the minimum distance between the ER / TR
/MCs and the horizontal subsystem is - CORRECT ANSWER -3" (75 mm)
RJ45wconnectorswusedwforw4-pairwUTPwarewidentifiedwasw-wCORRECTwANSWERw-8P8C
with Correct Answers | Rated A+
The video cable used in new installations is normally - CORRECT ANSWER -RG6
A structured cabling subsystem that connects buildings together in a multi-building
environment is call a - CORRECT ANSWER -Campus Backbone Subsystem
Straight conduit runs used in campus backbone systems should have pull boxes installed no
more than - CORRECT ANSWER -140' (43m) Apart
Label conduit for a campus backbone within - CORRECT ANSWER -6" (150 mm) Of The
Termination Point
Telecom cables in an ER or TR subsystem must be separated from electrical conduit or cable by
at least - CORRECT ANSWER -12" (300 mm)
Riser pathways should run perpendicular to fluorescent lighting and be separated by a distance
of least - CORRECT ANSWER -5" (125 mm)
Vertical cabling spans exceeding 30' (9 m) in riser support subsystems must be supported in -
CORRECT ANSWER -30' (9 m)
When installing horizontal ER / TR / MC sleeves, the minimum distance between the ER / TR
/MCs and the horizontal subsystem is - CORRECT ANSWER -3" (75 mm)
RJ45wconnectorswusedwforw4-pairwUTPwarewidentifiedwasw-wCORRECTwANSWERw-8P8C
