1
SHP final Questions with Correct
Answers for Specific Exam Mail
The firefighter may be installed next to a stand-alone
battery smoke detector
Ans: True
When performing a full system test, you may bypass any
open doors or windows
Ans: False
When programming an skey1,you must
Ans: Always enable the emergency
When running power to the take345,polarity doesn't
apply
Ans: False
When programming the emergency key for the
skey1,which zone/sensor type is used.
Pretest - Stuvia US
,2
Ans: Audible alarm (7)
When installing a smkt3,you must use the included screws
and anchors
Ans: True
When installing the firefighter, it is required to test the
customers existing smoke detectors
Ans: True
When installing a Dw21, where is the approved location
for the sensor
Ans: Between 6"(15cm) and 2'(61cm) from floor
When installing a dw11 on a vinyl or metal frame, what
should primarily use to mount the sensor
Ans: Provided double sided tape
Which of the following materials can you use to group
multiple ground terminals in a takeover.
Pretest - Stuvia US
, 3
Ans: Beans & wire caps
Which of the following sensors are you not allowed to
program using a translator
Ans: Smoke detector
When installing the take345, you must always test the
new 12v battery before using it.
Ans: True
What is the output voltage of transformer used to power
the sky control
Ans: 16.5
What is the minimum distance for placement of a co3
from the corners of the wall
Ans: 12"
The smkt3 has 2 function:smoke and heat detection
Pretest - Stuvia US
SHP final Questions with Correct
Answers for Specific Exam Mail
The firefighter may be installed next to a stand-alone
battery smoke detector
Ans: True
When performing a full system test, you may bypass any
open doors or windows
Ans: False
When programming an skey1,you must
Ans: Always enable the emergency
When running power to the take345,polarity doesn't
apply
Ans: False
When programming the emergency key for the
skey1,which zone/sensor type is used.
Pretest - Stuvia US
,2
Ans: Audible alarm (7)
When installing a smkt3,you must use the included screws
and anchors
Ans: True
When installing the firefighter, it is required to test the
customers existing smoke detectors
Ans: True
When installing a Dw21, where is the approved location
for the sensor
Ans: Between 6"(15cm) and 2'(61cm) from floor
When installing a dw11 on a vinyl or metal frame, what
should primarily use to mount the sensor
Ans: Provided double sided tape
Which of the following materials can you use to group
multiple ground terminals in a takeover.
Pretest - Stuvia US
, 3
Ans: Beans & wire caps
Which of the following sensors are you not allowed to
program using a translator
Ans: Smoke detector
When installing the take345, you must always test the
new 12v battery before using it.
Ans: True
What is the output voltage of transformer used to power
the sky control
Ans: 16.5
What is the minimum distance for placement of a co3
from the corners of the wall
Ans: 12"
The smkt3 has 2 function:smoke and heat detection
Pretest - Stuvia US
