Revit Certification exam prep
What is the recommended best practice for creating a family? - CORRECT ANSWER-
Reference planes > dimensions > parameters > geometry
An electrical designer wants to add a parameter to system family categories and
loadable family categories. What type of parameter should the designer create? -
CORRECT ANSWER-Project
An electrical designer is creating an unground conduit plan. Which view setting should
the designer adjust to show conduit beneath the associated level of the view? -
CORRECT ANSWER-View Range
An electrical designer selects a run of conduit and changes the phase status to
demolished. After doing this, an error appears stating that the elements need to be
disconnected. Why does this error occur? - CORRECT ANSWER-Demolished elements
cannot be connected.
An electrical designer places hosted lighting fixtures in the ceiling of a linked
architectural model. The designer then removes the linked architectural model. What
happens to the lighting fixtures? - CORRECT ANSWER-The lighting fixtures become
orphaned.
An electrical designer modifies a panel schedule template, but the panel schedules
associated with the template do not update. What should the designer do? - CORRECT
ANSWER-Select the panels in the Manage Panel Schedule Templates dialog and click
Update Schedules.
Which of the following elements is a system family? - CORRECT ANSWER-Cable tray
An MEP team is working with an architect that is using design options. The architect
states that the MEP team should show Option 2 in the MEP model. What should the
designer do? - CORRECT ANSWER-Specify the Design Option in the RVT Link Display
Settings dialog.
An electrical designer wants a view to create a detail that is unassocaited with the
model and model elements. What type of view should the designer create? - CORRECT
ANSWER-Drafting
When placing a tag by category, what controls which tag is used? - CORRECT
ANSWER-Loaded Tags And Symbols dialog
, An electrical designer is creating a lighting fixture family. The designer wants the lighting
fixture symbol to appear in 3D views when the Detail Level is Coarse and Medium.
What should the designer use to create the symbol in the family? - CORRECT
ANSWER-Model lines
When lighting fixtures are placed in a space, which space parameter is calculated
based on the Lumens from each fixture? - CORRECT ANSWER-Average Estimated
Illumination
An electrical designer is modeling conduit and cable trays. The designer wants to check
for clashes. Which tool should be used? - CORRECT ANSWER-Run Interference
Check
Where is the keynote numbering method controlled? - CORRECT ANSWER-Keynoting
settings
An electrical designer is working in a project with a linked architectural Revit model. The
designer is unable to select the link. What is causing this condition? - CORRECT
ANSWER-The Select Links option is disabled.
When there are numerous types of lighting fixtures available, how can a user narrow the
list? - CORRECT ANSWER-Use the Search field.
An electrical designer is creating a panel schedule template and is trying to drag the
right boundary line to make the panel schedule wider. The designer is unable to do so.
What should the designer do? - CORRECT ANSWER-Open the Set Template Options
and increase the Total width.
An electrical designer needs to set the Connection Type for a circuit to Feed Through
Lugs. What does the designer need to do to enable this functionality? - CORRECT
ANSWER-Select the panel and enable Feed Through Lugs in the Properties palette.
An electrical designer is tagging conduit in a building model. Some of the conduit is at
an angle. The designer wants the tags to rotate with the conduit. What should the
designer do? - CORRECT ANSWER-Open the tag family and enable Rotate with
component.
An electrical designer enables Section Box for a 3D view, but the section box is not
visible in the view. Which setting should the designer check? - CORRECT ANSWER-
Visibility/Graphic Overrides
When hovering the cursor over a component on a circuit, which key can be used to
highlight the circuit? - CORRECT ANSWER-Tab
What is the recommended best practice for creating a family? - CORRECT ANSWER-
Reference planes > dimensions > parameters > geometry
An electrical designer wants to add a parameter to system family categories and
loadable family categories. What type of parameter should the designer create? -
CORRECT ANSWER-Project
An electrical designer is creating an unground conduit plan. Which view setting should
the designer adjust to show conduit beneath the associated level of the view? -
CORRECT ANSWER-View Range
An electrical designer selects a run of conduit and changes the phase status to
demolished. After doing this, an error appears stating that the elements need to be
disconnected. Why does this error occur? - CORRECT ANSWER-Demolished elements
cannot be connected.
An electrical designer places hosted lighting fixtures in the ceiling of a linked
architectural model. The designer then removes the linked architectural model. What
happens to the lighting fixtures? - CORRECT ANSWER-The lighting fixtures become
orphaned.
An electrical designer modifies a panel schedule template, but the panel schedules
associated with the template do not update. What should the designer do? - CORRECT
ANSWER-Select the panels in the Manage Panel Schedule Templates dialog and click
Update Schedules.
Which of the following elements is a system family? - CORRECT ANSWER-Cable tray
An MEP team is working with an architect that is using design options. The architect
states that the MEP team should show Option 2 in the MEP model. What should the
designer do? - CORRECT ANSWER-Specify the Design Option in the RVT Link Display
Settings dialog.
An electrical designer wants a view to create a detail that is unassocaited with the
model and model elements. What type of view should the designer create? - CORRECT
ANSWER-Drafting
When placing a tag by category, what controls which tag is used? - CORRECT
ANSWER-Loaded Tags And Symbols dialog
, An electrical designer is creating a lighting fixture family. The designer wants the lighting
fixture symbol to appear in 3D views when the Detail Level is Coarse and Medium.
What should the designer use to create the symbol in the family? - CORRECT
ANSWER-Model lines
When lighting fixtures are placed in a space, which space parameter is calculated
based on the Lumens from each fixture? - CORRECT ANSWER-Average Estimated
Illumination
An electrical designer is modeling conduit and cable trays. The designer wants to check
for clashes. Which tool should be used? - CORRECT ANSWER-Run Interference
Check
Where is the keynote numbering method controlled? - CORRECT ANSWER-Keynoting
settings
An electrical designer is working in a project with a linked architectural Revit model. The
designer is unable to select the link. What is causing this condition? - CORRECT
ANSWER-The Select Links option is disabled.
When there are numerous types of lighting fixtures available, how can a user narrow the
list? - CORRECT ANSWER-Use the Search field.
An electrical designer is creating a panel schedule template and is trying to drag the
right boundary line to make the panel schedule wider. The designer is unable to do so.
What should the designer do? - CORRECT ANSWER-Open the Set Template Options
and increase the Total width.
An electrical designer needs to set the Connection Type for a circuit to Feed Through
Lugs. What does the designer need to do to enable this functionality? - CORRECT
ANSWER-Select the panel and enable Feed Through Lugs in the Properties palette.
An electrical designer is tagging conduit in a building model. Some of the conduit is at
an angle. The designer wants the tags to rotate with the conduit. What should the
designer do? - CORRECT ANSWER-Open the tag family and enable Rotate with
component.
An electrical designer enables Section Box for a 3D view, but the section box is not
visible in the view. Which setting should the designer check? - CORRECT ANSWER-
Visibility/Graphic Overrides
When hovering the cursor over a component on a circuit, which key can be used to
highlight the circuit? - CORRECT ANSWER-Tab
