Revit final exam Questions + Answers Graded A+

Revit final exam
A wall in your Revit model is hosted on Level 1. The wall is unconnected with a
height of 20'. You change the base offset to -2'.
a. What is the height of the wall from the bottom of the wall to the top of the
wall?
b. What is the height of the top of the wall when measured from Level 1? - CORRECT
ANSWER-a. 22'
b.20'

A wall in your Revit model is hosted on Level 1. The wall is attached to level 2 which
is 20' above Level 1. You change the base offset to -2'.
a. What is the height of the wall from the bottom of the wall to the top of the
wall?
b. What is the height to the top of the wall from Level 1? - CORRECT ANSWER-a. 22'
b. 20'

What is a "NOMINAL" dimension? - CORRECT ANSWER-The approximate, or named
dimension of an object or component

In Revit, a _____________ file allows you to start your project with
specific content and settings preset the way you like or need them. - CORRECT
ANSWER-templet

The Options Bar dynamically changes to show operations that
complement the current operation. - CORRECT ANSWER-true

In Revit, the _____________ key cycles you through available snaps
near your cursor. - CORRECT ANSWER-tab

In Revit, the relative size of text is controlled by the View Scale. - CORRECT ANSWER-
true

In Revit, dimensions are placed with only two clicks - CORRECT ANSWER-false

What are the four options for the Temporary Hide/Isolate feature? What does each of
the
options do? - CORRECT ANSWER-isolate category
hide category
isolate element
hide element

What are the six wall location options for creating walls in Revit? - CORRECT
ANSWER-wall centerline

, core centerline
finish face- exterior
finish face- interior
core face- exterior
core face- interior

What are the five stair location-line options for creating stairs in Revit? - CORRECT
ANSWER-exterior- support left
run- left
run- right
run- center
exterior- support right

A reference plane is a datum object - CORRECT ANSWER-true

a level is a datum object - CORRECT ANSWER-true

a dimension is a datum object - CORRECT ANSWER-false

a wall surface is a datum object - CORRECT ANSWER-false

a model line can be visible in multiple views - CORRECT ANSWER-true

a detail line can be visible in multiple views (it is only visible in the view it is created in) -
CORRECT ANSWER-false

Any door or window can be inserted in a curtain wall (it is only curtain wall doors can be
inserted) - CORRECT ANSWER-false

The wall thickness is an instance property (False. It's the total width of all the wall
components in the wall type. - CORRECT ANSWER-false

What is a Quantity Take-off schedule used for? - CORRECT ANSWER-It is used for
objects that are typically built or assembled off-site and then brought to a construction
site (such as a door, light fixture, or plumbing fixture)

Where would you typically embed the cost information used in a quantity/take-off? -
CORRECT ANSWER-(In the type properties of the object itself)

What is a material take-off schedule used for: - CORRECT ANSWER-It is used to
schedule components built on site such as walls, floor slabs,

Where would you typically embed the cost information for an item scheduled with a
material take-off? - CORRECT ANSWER-(In the material properties of materials used in
the object type)