CDFA Weight Verification Practice Questions ACTUAL EXAM QUESTIONS WITH COMPLETE SOLUTION GUIDE (A+ GRADED 100% VERIFIED) LATEST VERSION 2025!!

CDFA Weight Verification Practice
Questions ACTUAL EXAM
QUESTIONS WITH COMPLETE
SOLUTION GUIDE (A+ GRADED
100% VERIFIED) LATEST VERSION
2025!!

Save




Terms in this set (121)


Specifications Manufacturers of devices
are particularly
directed to

,Newly Class I, II, III, IIIL, or IIII
manufactured
scales are
required to be
designated as

The normal horizontal
valance position
of the
weighbeam of a
beam scale shall
be

A county sealer/ Different from regulations
director of W&M
may, with the
approval of the
Secretary of
Food and
Agriculture, use
a frequency of
inspection which
is

,On a 0.04 inches
prescription
scale equipped
with a balance
indicator, if this
indicator
consists of an
indicator and a
graduated scale
and they are not
in the same
plane, the
clearance
between the
indicator and the
graduations shall
not be more
than

Graduations of a they may be conveniently read
scale beam shall
be so varied in
length that

, A poise stop is there is no zero graduation
not necessary
on a steelyard
when

The adjusting brass
material in a
poise shall be
securely
enclosed and
firmly fixed in
position and it
shall not be in
contact with the
weigh beam, if
softer than

The sensitivity regardless of maintenance and
requirement of a acceptance tolerances
scale shall be
applied in
conjunction with