5/29/25, 4:57 PM MSF Basic eCourse: About Basic Operation ACTUAL EXAM QUESTIONS WITH COMPLETE SOLUTION GUIDE (A+ GRADED 10…
MSF Basic eCourse: About Basic Operation
ACTUAL EXAM QUESTIONS WITH COMPLETE
SOLUTION GUIDE (A+ GRADED 100% VERIFIED)
LATEST VERSION 2025!!
Save
Terms in this set (35)
FINE-C refers to an engine pre-start routine. It stands
FINE-C for Fuel, Ignition, Neutral, Engine cut-off switch,
Choke and Clutch.
Fuel, means if equipped, turn the fuel supply valve
F
On.
Ignition, means turn the ignition switch to the On
I
position. Some indicator lights should come on.
Neutral, means to be in Neutral. The green light in the
instrument cluster "indicates" neutral. When in neutral,
N
the motorcycle will roll forward and backward with
the clutch lever and front brake lever released.
Engine cut-off switch means put the switch in the
E
Run/On position.
Choke and Clutch, means to set the choke and
squeeze in the clutch lever. The choke should be On
C
for a cold engine, although some motorcycles do not
have a choke.
https://quizlet.com/1049409872/msf-basic-ecourse-about-basic-operation-actual-exam-questions-with-complete-solution-guide-a-graded-100-verified-… 1/12
, 5/29/25, 4:57 PM MSF Basic eCourse: About Basic Operation ACTUAL EXAM QUESTIONS WITH COMPLETE SOLUTION GUIDE (A+ GRADED 10…
When starting the engine: Apply at least one of the
brakes.
Squeeze in the clutch lever fully.
Press the starter button.
Do not use the throttle if the choke is On as this could
provide too much fuel to the engine.
Engine start procedure
Once the engine is started, you can release the clutch
lever, but do so slowly in case the motorcycle is not in
neutral.
Some engines will not start if the side stand is down.
Many motorcycles will allow the engine to start but
will stall when the motorcycle is shifted into gear
when the side stand is down.
To stop the engine:
First, move the engine cut-off switch to Off with your
right thumb. Do this every time so you can develop
the habit in case you need to shut off the engine in an
emergency.
Engine stop procedure
Turn the ignition switch to Off.
Turn the fuel supply valve Off if it has that position.
It may help to remember the Engine Stop Procedure
as Thumb, Key, Valve.
https://quizlet.com/1049409872/msf-basic-ecourse-about-basic-operation-actual-exam-questions-with-complete-solution-guide-a-graded-100-verified-… 2/12
MSF Basic eCourse: About Basic Operation
ACTUAL EXAM QUESTIONS WITH COMPLETE
SOLUTION GUIDE (A+ GRADED 100% VERIFIED)
LATEST VERSION 2025!!
Save
Terms in this set (35)
FINE-C refers to an engine pre-start routine. It stands
FINE-C for Fuel, Ignition, Neutral, Engine cut-off switch,
Choke and Clutch.
Fuel, means if equipped, turn the fuel supply valve
F
On.
Ignition, means turn the ignition switch to the On
I
position. Some indicator lights should come on.
Neutral, means to be in Neutral. The green light in the
instrument cluster "indicates" neutral. When in neutral,
N
the motorcycle will roll forward and backward with
the clutch lever and front brake lever released.
Engine cut-off switch means put the switch in the
E
Run/On position.
Choke and Clutch, means to set the choke and
squeeze in the clutch lever. The choke should be On
C
for a cold engine, although some motorcycles do not
have a choke.
https://quizlet.com/1049409872/msf-basic-ecourse-about-basic-operation-actual-exam-questions-with-complete-solution-guide-a-graded-100-verified-… 1/12
, 5/29/25, 4:57 PM MSF Basic eCourse: About Basic Operation ACTUAL EXAM QUESTIONS WITH COMPLETE SOLUTION GUIDE (A+ GRADED 10…
When starting the engine: Apply at least one of the
brakes.
Squeeze in the clutch lever fully.
Press the starter button.
Do not use the throttle if the choke is On as this could
provide too much fuel to the engine.
Engine start procedure
Once the engine is started, you can release the clutch
lever, but do so slowly in case the motorcycle is not in
neutral.
Some engines will not start if the side stand is down.
Many motorcycles will allow the engine to start but
will stall when the motorcycle is shifted into gear
when the side stand is down.
To stop the engine:
First, move the engine cut-off switch to Off with your
right thumb. Do this every time so you can develop
the habit in case you need to shut off the engine in an
emergency.
Engine stop procedure
Turn the ignition switch to Off.
Turn the fuel supply valve Off if it has that position.
It may help to remember the Engine Stop Procedure
as Thumb, Key, Valve.
https://quizlet.com/1049409872/msf-basic-ecourse-about-basic-operation-actual-exam-questions-with-complete-solution-guide-a-graded-100-verified-… 2/12
