NATE Core practice Exam 2025
Questions and Answers
what type of meter is most appropriate when a tech must determine voltage? - ANSWER✔✔-
voltmeter
temp at which moisture begins to condense on objects? - ANSWER✔✔-dew point
btu's equivalent to 1 watt hour
A. 3.418
B. 3.413
C. 3.213
D. 4.314 - ANSWER✔✔-3.413 btu
electrical test meter that test volts, ohms and current
A. multimeter
B. ohmeter
C. monometer
D. trimeter - ANSWER✔✔-multimeter
FOR STUDY PURPOSES ONLY COPYRIGHT © 2025 ALL RIGHTS RESERVED 1
, when climbing down a ladder workers must - ANSWER✔✔-use 2 hands
single phase load is drawing 4.5 amps in a 230V circuit with a power factor of 0.91
A. 1245 watts
B. 3841 watts
C. 1137 watts
D. 1126 watts - ANSWER✔✔-1137 watts
what meter function should be used to know if a limit switch is open or closed when de-energized
A. amps
B. ohms
C. volts
D. resistance - ANSWER✔✔-ohms
the purpose of the electric motor is - ANSWER✔✔-to change electrical energy into mechanical
energy
on a single phase PSC motor, the three terminals are
A. run start go
B. common go stop
C. run start common
D. none of the above - ANSWER✔✔-run, start, common
FOR STUDY PURPOSES ONLY COPYRIGHT © 2025 ALL RIGHTS RESERVED 2
Questions and Answers
what type of meter is most appropriate when a tech must determine voltage? - ANSWER✔✔-
voltmeter
temp at which moisture begins to condense on objects? - ANSWER✔✔-dew point
btu's equivalent to 1 watt hour
A. 3.418
B. 3.413
C. 3.213
D. 4.314 - ANSWER✔✔-3.413 btu
electrical test meter that test volts, ohms and current
A. multimeter
B. ohmeter
C. monometer
D. trimeter - ANSWER✔✔-multimeter
FOR STUDY PURPOSES ONLY COPYRIGHT © 2025 ALL RIGHTS RESERVED 1
, when climbing down a ladder workers must - ANSWER✔✔-use 2 hands
single phase load is drawing 4.5 amps in a 230V circuit with a power factor of 0.91
A. 1245 watts
B. 3841 watts
C. 1137 watts
D. 1126 watts - ANSWER✔✔-1137 watts
what meter function should be used to know if a limit switch is open or closed when de-energized
A. amps
B. ohms
C. volts
D. resistance - ANSWER✔✔-ohms
the purpose of the electric motor is - ANSWER✔✔-to change electrical energy into mechanical
energy
on a single phase PSC motor, the three terminals are
A. run start go
B. common go stop
C. run start common
D. none of the above - ANSWER✔✔-run, start, common
FOR STUDY PURPOSES ONLY COPYRIGHT © 2025 ALL RIGHTS RESERVED 2