Wireways, Raceways, and Fittings (Module 26108-20) Questions With Complete Solutions

Wireways, Raceways, and Fittings (Module
26108-20) Questions With Complete
Solutions


A 45-degree bend can be made using a ____.
Correct Answers elbow


A metric fastener designation of M10 means that
the fastener has ____. Correct Answers a thread
diameter of 10 mm


A type of anchor that is used when jacking or
leveling the fastening component is a ____. Correct
Answers stud bolt anchor


A type of cable tray support that suspends the tray
from a single rod is called ____. Correct Answers
center hung support


A type of conduit body with a 90degree connector
and the cover on the right is a ____. Correct
Answers Type LB

, A type of conduit support that can be used to
prevent the need for offsets at fittings is a ____.
Correct Answers standoff support


A type of conduit that has a wall thickness less
than that of RMC but thicker than EMT is _____.
Correct Answers IMC


A typical metric fastener size is ____. Correct
Answers M6 x 1


Cable tray used in a caustic environment should be
coated with ____. Correct Answers PVC


Cable trays mounted in a tunnel are most likely to
use ____. Correct Answers wall mounting


Conduit is best stored ____. Correct Answers in
pipe racks


Derating factors must be applied when the number
of current-carrying conductor in a wireway exceeds
____. Correct Answers 30