Solutions
(Refer to Figure 144) What changes in control
displacement should be made so that '1' would
result in a coordinated standard rate turn? Correct
Answers Increase right rudder and increase rate of
turn
(refer to Figure 144) What changes in control
displacement should be made that that '2' would
result in a coordinated standard rate turn? Correct
Answers Increase left rudder and increase rate of
turn
(Refer to Figure 144) Which illustration indicates a
coordinated turn? Correct Answers 3
(refer to Figure 144) Which illustration indicates a
skidding turn? Correct Answers 1
(Refer to Figure 144) Which illustration indicates a
slipping turn? Correct Answers 2
(Refer to Figure 145) What is the correct sequence
for recovery from the unusual attitude indicated?
Correct Answers Reduce power, level the wings,
bring pitch attitude to level flight
,(Refer to Figure 146) Identify the system that has
failed and determine a corrective action to return
the airplane to straight-and-level flight Correct
Answers Static/pitot system is blocked; lower the
nose and level the wings to level-flight attitude by
use of attitude indicator
(Refer to Figure 147) Which is the correct sequence
for recovery from the unusual attitude indicated?
Correct Answers Add power, lower nose, level
wings, return to original attitude and heading
(Refer to Figure 148) What is the flight attitude?
One system which transmits information to the
instruments has malfunctioned Correct Answers
(Refer to Figure 148) What is the flight attitude?
One system which transmits information to the
instruments has malfunctioned Correct Answers
Climbing turn to the right
(Refer to Figure 149) What is the flight attitude?
One system which transmits information to the
instruments has malfunctioned. Correct Answers
Straight and level flight
(Refer to Figure 150) What is the flight altitude?
One instrument has malfunctioned Correct
Answers Climbing turn to the right
, Altimeter setting is the value to which the scale of
the pressure altimeter is set so the altimeter
indicates Correct Answers true altitude at field
elevation
Altimeter setting is the value to which the scale of
the pressure altimeter is set so the altimeter
indicates Correct Answers true altitude at field
elevation
An aircraft which is equipped with an Electronic
Flight Display (EFD) can Correct Answers offer
new capabilities and simplify the basic flying task
Approximately what percent of the indicated
vertical speed should be used to determine the
number of feet to lead the level-off from a climb to
a specific altitude? Correct Answers 10 percent
Approximately what percent of the indicated
vertical speed should be used to determine the
number of feet to lead the level-off from a climb to
a specific altitude? Correct Answers 10 percent
As a rule of thumb, altitude corrections of less than
100 feet should be corrected by using a Correct
Answers half bar width on the attitude indicator
At an altitude of 6,500 feet MSL, the current
altimeter setting is 30.42" Hg. The pressure