1|Page
Texas LP-Gas dispensing exam, LP-Gas safety,
propane dispensing test, verified LP-Gas answers,
Texas propane regulations, LP-Gas compliance exam,
2025 LP-Gas certification
relief valves on forklift cylinders must be replaced within ____
years of the manufacture date & every ____ years there after -
ANSWER-12
10
the fixed maximum liquid level gauge is ____ when filling a
forklift cylinder by volume - ANSWER-opened
for DOT-4BA240 specification cylinder, the "240" indicates the
cylinders ____ ____ - ANSWER-service pressure
if there is no letter following the date stamped on the cylinder, it
indicates requalification is required within ____ years -
ANSWER-12
leaks, cracks, or bulging are often discovered during the
cylinders ________ inspection - ANSWER-pre-fill
,2|Page
when a steady white stream is emitted from the fixed maximum
liquid level gauge, the next step is to immediately
_________________________ - ANSWER-close the hose end
valve
A ____ ____ is used to properly position the cylinder on the
forklift - ANSWER-locating pin
when filling forklift cylinders by weight,it is important to
______________________________ - ANSWER-verify that the
cylinder is not overfilled at the conclusion of the filling process
TW is required when calculating cylinder filling by _____ -
ANSWER-weight
TW - ANSWER-tare weight
WC - ANSWER-water capacity
, 3|Page
when changing out a forklift cylinder the cylinder service valve
should be ____ prior to making a the hose connection to the
cylinder - ANSWER-closed
the location pin on the forklift is used to
_________________________ - ANSWER-properly position
the cylinder on the forklift
when filling cylinders by weight, the ____ is used to determine
that the cylinder has reached its maximum permitted filling level
- ANSWER-scale
permanently mounted mobile motor fuel and RV tanks are built
to ____ specifications - ANSWER-ASME
propane auto gas refueling stations and dispensaries are typically
used to refuel ____ ____ ____ - ANSWER-vehicles
forklifts
RV tanks
all ignition sources must be atleast ____ feet from the motor fuel
dispenser - ANSWER-25
Texas LP-Gas dispensing exam, LP-Gas safety,
propane dispensing test, verified LP-Gas answers,
Texas propane regulations, LP-Gas compliance exam,
2025 LP-Gas certification
relief valves on forklift cylinders must be replaced within ____
years of the manufacture date & every ____ years there after -
ANSWER-12
10
the fixed maximum liquid level gauge is ____ when filling a
forklift cylinder by volume - ANSWER-opened
for DOT-4BA240 specification cylinder, the "240" indicates the
cylinders ____ ____ - ANSWER-service pressure
if there is no letter following the date stamped on the cylinder, it
indicates requalification is required within ____ years -
ANSWER-12
leaks, cracks, or bulging are often discovered during the
cylinders ________ inspection - ANSWER-pre-fill
,2|Page
when a steady white stream is emitted from the fixed maximum
liquid level gauge, the next step is to immediately
_________________________ - ANSWER-close the hose end
valve
A ____ ____ is used to properly position the cylinder on the
forklift - ANSWER-locating pin
when filling forklift cylinders by weight,it is important to
______________________________ - ANSWER-verify that the
cylinder is not overfilled at the conclusion of the filling process
TW is required when calculating cylinder filling by _____ -
ANSWER-weight
TW - ANSWER-tare weight
WC - ANSWER-water capacity
, 3|Page
when changing out a forklift cylinder the cylinder service valve
should be ____ prior to making a the hose connection to the
cylinder - ANSWER-closed
the location pin on the forklift is used to
_________________________ - ANSWER-properly position
the cylinder on the forklift
when filling cylinders by weight, the ____ is used to determine
that the cylinder has reached its maximum permitted filling level
- ANSWER-scale
permanently mounted mobile motor fuel and RV tanks are built
to ____ specifications - ANSWER-ASME
propane auto gas refueling stations and dispensaries are typically
used to refuel ____ ____ ____ - ANSWER-vehicles
forklifts
RV tanks
all ignition sources must be atleast ____ feet from the motor fuel
dispenser - ANSWER-25
