CSWA solidworks certification exam questions with correct
solutions
1. False True or False - Dragging the edge
of
plane changes its geometric size.
2. Selecting a plane in the graphics area These following methods can be
and then clicking on the Sketch button used to begin a sketch on a
in the CommandManager, clicking on plane.
the Sketch button in the
CommandManager and then selecting
a plane, right-clicking on a plane and
selecting "Sketch" from the context
tool- bar
3. Y-axis This axis of the reference triad
should
be clicked to change the view
normal to the Top plane
4. False True or False - In order to sketch
on a
face of a body, the face must be
parallel with one of the three
default planes in SOLIDWORKS.
5. True True or False - A face must be
planar in
order to have a sketch drawn on it.
6. The geometry you select The Smart Dimension tool
determines what type of
dimension to add by
7. Launching the Shortcut Toolbar by "Smart Dimen-
pressing "S" on the keyboard and click sion", using mouse-
1/
24
, CSWA solidworks certification exam questions with correct
solutions
gestures by right-clicking and dragging You access the "Smart Dimension"
up in the graphics area, clicking the tool by
"Smart Dimension" icon from the
Sketch tab of the CommandManager
2/
24
, CSWA solidworks certification exam questions with correct
solutions
8. Radial The Smart Dimension tool
automatically
adds what type of dimension when
you select an arc?
9. Using the spinbox to increase or decrease How can you edit the value of a
dimen-
the value, using the arrows to increase or de- sion by using the Modify
Dialog box?
crease the value, clicking in the window
and type in a new value
10. True True or False - When dimensioning
to
centerlines, SOLIDWORKS
provides the ability to change
from linear to diame- ter
dimensions.
11. snap to axes Which is not an available option for
a line?
12. Angle Which line type allows dimensions
to be
added with the creation of the line?
13. Selecting a line, clicking "Centerline" What method will not convert a line
button in the CommandManager to a construction line?
14. True True or False - When a corner
rectangle
is sketched, two of the sides are
auto- matically set to horizontal and
the other two are automatically set to
3/
24
solutions
1. False True or False - Dragging the edge
of
plane changes its geometric size.
2. Selecting a plane in the graphics area These following methods can be
and then clicking on the Sketch button used to begin a sketch on a
in the CommandManager, clicking on plane.
the Sketch button in the
CommandManager and then selecting
a plane, right-clicking on a plane and
selecting "Sketch" from the context
tool- bar
3. Y-axis This axis of the reference triad
should
be clicked to change the view
normal to the Top plane
4. False True or False - In order to sketch
on a
face of a body, the face must be
parallel with one of the three
default planes in SOLIDWORKS.
5. True True or False - A face must be
planar in
order to have a sketch drawn on it.
6. The geometry you select The Smart Dimension tool
determines what type of
dimension to add by
7. Launching the Shortcut Toolbar by "Smart Dimen-
pressing "S" on the keyboard and click sion", using mouse-
1/
24
, CSWA solidworks certification exam questions with correct
solutions
gestures by right-clicking and dragging You access the "Smart Dimension"
up in the graphics area, clicking the tool by
"Smart Dimension" icon from the
Sketch tab of the CommandManager
2/
24
, CSWA solidworks certification exam questions with correct
solutions
8. Radial The Smart Dimension tool
automatically
adds what type of dimension when
you select an arc?
9. Using the spinbox to increase or decrease How can you edit the value of a
dimen-
the value, using the arrows to increase or de- sion by using the Modify
Dialog box?
crease the value, clicking in the window
and type in a new value
10. True True or False - When dimensioning
to
centerlines, SOLIDWORKS
provides the ability to change
from linear to diame- ter
dimensions.
11. snap to axes Which is not an available option for
a line?
12. Angle Which line type allows dimensions
to be
added with the creation of the line?
13. Selecting a line, clicking "Centerline" What method will not convert a line
button in the CommandManager to a construction line?
14. True True or False - When a corner
rectangle
is sketched, two of the sides are
auto- matically set to horizontal and
the other two are automatically set to
3/
24
