ASE Brake Certification Vocabulary
Questions With Correct Answers!!
ohmis law
it takes one volt to push one ampthrough one OHM
Kirchoffs law
inaseries circuit all of the source voltage is used by the loads in the circuit
the highest resistance in a sires circuit
uses the most voltage
RFI stands for
radio frequency interference
power switch circuit
a circuit in which the control is before the load.
ground switched citcuit
a circuit in which the control is after the load
module and computer is
the same thing
inputs
, indoemation in the fork of electrical signlas.
*may be requested.
outputs
are xommands from the modules of an electrolic sustem that control devices and components in
the sysyem
multi plexins
where modules (compiters) talk to eachother through a series of inputs and outputs
DTC stands for
doagnodtic trouble codes
what does DTC do
tells you where afault may exist. What the module "thinks" is wrong mody DTCs are 5
digit aplha numeric codes.
pids
parameter identification
bi direction control
allows yiu to use as an tool to send signals to the module
examples of DTC
CXXXX chassis
BXXXXX body
what is a cycle
one complete motion
what is frequency
ghe humber of these cyles that occur in one seccond also stated as hertz
DoubleFlare
Questions With Correct Answers!!
ohmis law
it takes one volt to push one ampthrough one OHM
Kirchoffs law
inaseries circuit all of the source voltage is used by the loads in the circuit
the highest resistance in a sires circuit
uses the most voltage
RFI stands for
radio frequency interference
power switch circuit
a circuit in which the control is before the load.
ground switched citcuit
a circuit in which the control is after the load
module and computer is
the same thing
inputs
, indoemation in the fork of electrical signlas.
*may be requested.
outputs
are xommands from the modules of an electrolic sustem that control devices and components in
the sysyem
multi plexins
where modules (compiters) talk to eachother through a series of inputs and outputs
DTC stands for
doagnodtic trouble codes
what does DTC do
tells you where afault may exist. What the module "thinks" is wrong mody DTCs are 5
digit aplha numeric codes.
pids
parameter identification
bi direction control
allows yiu to use as an tool to send signals to the module
examples of DTC
CXXXX chassis
BXXXXX body
what is a cycle
one complete motion
what is frequency
ghe humber of these cyles that occur in one seccond also stated as hertz
DoubleFlare
