FSVO 2025/2026 LATEST UPDATE COMPREHENSIVE
QUESTIONS AND VERIFIED ANSWERS [MOST TESTED
QUESTIONS] CERTIFIED STUDY GUIDE RESOURCES GRADE
A+
The purpose of using a spotter is to - ( ANSWER)-the driver by observing cross traffic the as the area in
the blind spot
horizontal and vertical openings, the operator must know: To effectively judge the ability of a v ehicle to
pass through areas of restricted - ( ANSWER)-vehicle dimensions.
Which driving skill would not require using a spotter? - ( ANSWER)-Diminishing clearance
The distance a vehicle travels from the point where you begin recognizing the hazard until the apparatus
comes to a complete stop is called the: - ( ANSWER)-total stopping distance.
The confined space turnaround maneuver allows an operator to turn the apparatus degrees - (
ANSWER)-180
Improper tire pressures may cause - ( ANSWER)-poor handling
One method of performing an apparatus/pretrip inspection is the - ( ANSWER)-walk-around method.
Before shutdown the apparatus engine temperature should be allowed to stabilize by idling it for
minutes. - ( ANSWER)-3 to 5
Checking for voltage, electrolyte level, and corrosion are all steps in inspecting: - ( ANSWER)-the battery.
, While traveling in the center lane of a multiple-lane highway on an emergency call, the vehicle in front
of you stops. You should: - ( ANSWER)-brake to reduce speed and pass on the left side of the vehicle.
The vacuum test requires a reading at the end of 5 minutes with no more than inches of vacuum being
lost. - ( ANSWER)-10
When responding to emergencies, the use of warning devices: - ( ANSWER)-does not allow the driver to
disregard other drivers.
When approaching unguarded railroad crossings, the driver shall: - ( ANSWER)-come to a complete stop.
Level I staging may be: - ( ANSWER)-used in the initial response to a fire or other incident involving more
than one responding company.
Many accidents involving apparatus are caused by the operator - ( ANSWER)-misunderstanding the
capabilities of the apparatus.
At a working fire, which apparatus has the highest priority for position? - ( ANSWER)-Aerial apparatus
A fire apparatus should be dried: - ( ANSWER)-with a clean chamois
You have responded to an emergency on a limited-access highway. Your apparatus is not being used.
You should: - ( ANSWER)-use the apparatus as a barrier between the traffic flow and the responders on
scene.
When stopping an apparatus, it is necessary to consider the: - ( ANSWER)-A. empty weight of the
apparatus.
B. length of the apparatus.
C. condition of the brakes.
D. height of the apparatus.
QUESTIONS AND VERIFIED ANSWERS [MOST TESTED
QUESTIONS] CERTIFIED STUDY GUIDE RESOURCES GRADE
A+
The purpose of using a spotter is to - ( ANSWER)-the driver by observing cross traffic the as the area in
the blind spot
horizontal and vertical openings, the operator must know: To effectively judge the ability of a v ehicle to
pass through areas of restricted - ( ANSWER)-vehicle dimensions.
Which driving skill would not require using a spotter? - ( ANSWER)-Diminishing clearance
The distance a vehicle travels from the point where you begin recognizing the hazard until the apparatus
comes to a complete stop is called the: - ( ANSWER)-total stopping distance.
The confined space turnaround maneuver allows an operator to turn the apparatus degrees - (
ANSWER)-180
Improper tire pressures may cause - ( ANSWER)-poor handling
One method of performing an apparatus/pretrip inspection is the - ( ANSWER)-walk-around method.
Before shutdown the apparatus engine temperature should be allowed to stabilize by idling it for
minutes. - ( ANSWER)-3 to 5
Checking for voltage, electrolyte level, and corrosion are all steps in inspecting: - ( ANSWER)-the battery.
, While traveling in the center lane of a multiple-lane highway on an emergency call, the vehicle in front
of you stops. You should: - ( ANSWER)-brake to reduce speed and pass on the left side of the vehicle.
The vacuum test requires a reading at the end of 5 minutes with no more than inches of vacuum being
lost. - ( ANSWER)-10
When responding to emergencies, the use of warning devices: - ( ANSWER)-does not allow the driver to
disregard other drivers.
When approaching unguarded railroad crossings, the driver shall: - ( ANSWER)-come to a complete stop.
Level I staging may be: - ( ANSWER)-used in the initial response to a fire or other incident involving more
than one responding company.
Many accidents involving apparatus are caused by the operator - ( ANSWER)-misunderstanding the
capabilities of the apparatus.
At a working fire, which apparatus has the highest priority for position? - ( ANSWER)-Aerial apparatus
A fire apparatus should be dried: - ( ANSWER)-with a clean chamois
You have responded to an emergency on a limited-access highway. Your apparatus is not being used.
You should: - ( ANSWER)-use the apparatus as a barrier between the traffic flow and the responders on
scene.
When stopping an apparatus, it is necessary to consider the: - ( ANSWER)-A. empty weight of the
apparatus.
B. length of the apparatus.
C. condition of the brakes.
D. height of the apparatus.
