CFQ EXAM QUESTIONS AND ANSWERS
The employer. - Answers :Who is responsible for training employees in the WHMIS
system?
The employer.
Workers Compensation.
The Federal Government.
The provincial government.
hydration - Answers :The hardening process of concrete is called .
curing
cooking
hydration
hydraulics
It contains an extinguishing agent that will not conduct electricity. - Answers :What is a
characteristic of a Class C fire extinguisher?
It contains an extinguishing agent that will not conduct electricity.
It contains an extinguishing agent that will conduct electricity.
The extinguishing agent will freeze in cold weather.
The extinguishing agent should not be used on a paper fire.
Remove it from service and destroy it or return it to the manufacturer. - Answers :What
must be done with any fall protection equipment that is defective, has come in contact
with excessive heat or a substance that may cause it to fail?
Throw it in the garbage.
Remove it from service and destroy it or return it to the manufacturer.
Remove it from service and try to fix it.
Get it inspected by the manufacturer.
3 - Answers :A professional engineer must design temporary protective structures in an
excavation over metres in depth.
4.5
4
3.5
3
Phillips. - Answers :Which of the following is not a proper name for a screw head style?
Oval.
Bugle.
Phillips.
Wafer.
Flattened. - Answers :Which of the following is not a proper name for a screw head
type?
Posidrive.
, Slotted.
Correct:
Flattened.
Robertson.
1-1.5 kW. - Answers :What is minimal wattage in kilowatts requirement for a generator
used for typical carpentry tools on a construction site?
18 Kw.
12 kW.
3-4 kW.
1-1.5 kW.
*Bark or lack of wood on the edge of the corner - Answers :Which of the following best
describes the characteristic "wane" found on lumber?
A well defined accumulation of pitch in the wood cells in a streak form
It is exposed on one surface and usually results in a cupped surface on the opposite
face
A separation that extends from one surface to the opposite or adjoining surface
*Bark or lack of wood on the edge of the corner
They are sound knots containing a hole greater than 6 mm - Answers :Which of the
following best describes a hollow knot?
It contains decay
They are sound knots containing a hole greater than 6 mm
They often have bark around them
They are held in place by growth, shape or position
It takes 4-10 hours to cure - Answers :Which of the following best describes resorcinol
glues?
It is nice to work with as there are no health issues.
Correct:
It takes 4-10 hours to cure
It takes 2-8 hours to dry and will stain plywood and even plastic.
Sets in any temperature but cures faster with heat and not waterproof.
The boom length is fixed - Answers :How are Carrier mounted lattice boom cranes
different from hydraulic telescoping booms?
The boom length is fixed.
The boom length is more telescopic.
The Carrier mounted type is always larger.
The Carrier mounted type is always lighter in mass.
Positioned between the hook and the load line also holding the load if the load line
twists. - Answers :Which of the following best describes a swivel?
The employer. - Answers :Who is responsible for training employees in the WHMIS
system?
The employer.
Workers Compensation.
The Federal Government.
The provincial government.
hydration - Answers :The hardening process of concrete is called .
curing
cooking
hydration
hydraulics
It contains an extinguishing agent that will not conduct electricity. - Answers :What is a
characteristic of a Class C fire extinguisher?
It contains an extinguishing agent that will not conduct electricity.
It contains an extinguishing agent that will conduct electricity.
The extinguishing agent will freeze in cold weather.
The extinguishing agent should not be used on a paper fire.
Remove it from service and destroy it or return it to the manufacturer. - Answers :What
must be done with any fall protection equipment that is defective, has come in contact
with excessive heat or a substance that may cause it to fail?
Throw it in the garbage.
Remove it from service and destroy it or return it to the manufacturer.
Remove it from service and try to fix it.
Get it inspected by the manufacturer.
3 - Answers :A professional engineer must design temporary protective structures in an
excavation over metres in depth.
4.5
4
3.5
3
Phillips. - Answers :Which of the following is not a proper name for a screw head style?
Oval.
Bugle.
Phillips.
Wafer.
Flattened. - Answers :Which of the following is not a proper name for a screw head
type?
Posidrive.
, Slotted.
Correct:
Flattened.
Robertson.
1-1.5 kW. - Answers :What is minimal wattage in kilowatts requirement for a generator
used for typical carpentry tools on a construction site?
18 Kw.
12 kW.
3-4 kW.
1-1.5 kW.
*Bark or lack of wood on the edge of the corner - Answers :Which of the following best
describes the characteristic "wane" found on lumber?
A well defined accumulation of pitch in the wood cells in a streak form
It is exposed on one surface and usually results in a cupped surface on the opposite
face
A separation that extends from one surface to the opposite or adjoining surface
*Bark or lack of wood on the edge of the corner
They are sound knots containing a hole greater than 6 mm - Answers :Which of the
following best describes a hollow knot?
It contains decay
They are sound knots containing a hole greater than 6 mm
They often have bark around them
They are held in place by growth, shape or position
It takes 4-10 hours to cure - Answers :Which of the following best describes resorcinol
glues?
It is nice to work with as there are no health issues.
Correct:
It takes 4-10 hours to cure
It takes 2-8 hours to dry and will stain plywood and even plastic.
Sets in any temperature but cures faster with heat and not waterproof.
The boom length is fixed - Answers :How are Carrier mounted lattice boom cranes
different from hydraulic telescoping booms?
The boom length is fixed.
The boom length is more telescopic.
The Carrier mounted type is always larger.
The Carrier mounted type is always lighter in mass.
Positioned between the hook and the load line also holding the load if the load line
twists. - Answers :Which of the following best describes a swivel?
