HPE6-A46 Delta-Aruba Certified
Switching Professional Exam
Question 1: What command enters configuration mode on an
ArubaOS-Switch?
A. enable
B. configure terminal
C. configure
D. setup
Correct: B
Explanation: “configure terminal” (or “conf t”) is the standard command
to enter global configuration mode on ArubaOS-Switch.
Question 2: Which Aruba switch series supports Virtual Switching
Framework (VSF)?
A. 2530
B. 3810M
C. 5400R
D. 2920
Correct: B
,HPE6-A46 Delta-Aruba Certified
Switching Professional Exam
Explanation: The Aruba 3810M series supports Virtual Switching
Framework for stacking and HA.
Question 3: What is the default VLAN ID on Aruba switches?
A. 1
B. 10
C. 100
D. 4094
Correct: A
Explanation: VLAN 1 is the default VLAN for management and untagged
traffic.
Question 4: Which protocol tags VLAN frames on trunks?
A. ISL
B. 802.1Q
C. LACP
D. STP
Correct: B
,HPE6-A46 Delta-Aruba Certified
Switching Professional Exam
Explanation: IEEE 802.1Q inserts 4-byte tags to identify VLAN
membership on trunked links.
Question 5: How do you assign VLAN 20 to interface 1/1/1?
A. vlan 20 interface 1/1/1
B. interface 1/1/1 vlan 20
C. interface 1/1/1 untagged vlan 20
D. vlan 20 untagged 1/1/1
Correct: D
Explanation: “vlan 20 untagged 1/1/1” assigns port 1/1/1 as an
untagged member of VLAN 20.
Question 6: What command shows the VLAN membership table?
A. show vlan
B. show config vlan
C. show vlan brief
D. show vlan database
Correct: C
, HPE6-A46 Delta-Aruba Certified
Switching Professional Exam
Explanation: “show vlan brief” displays VLAN IDs with their
tagged/untagged port lists.
Question 7: Which mode must a port be in to carry multiple VLANs?
A. access
B. hybrid
C. trunk
D. hybrid-access
Correct: C
Explanation: Trunk mode carries multiple VLANs by tagging frames per
802.1Q.
Question 8: Which command configures a native VLAN on a trunk port?
A. vlan native 5 tagged 1/1/1
B. interface 1/1/1 native vlan 5
C. vlan 5 untagged 1/1/1
D. trunk 1/1/1 native 5
Correct: C
Switching Professional Exam
Question 1: What command enters configuration mode on an
ArubaOS-Switch?
A. enable
B. configure terminal
C. configure
D. setup
Correct: B
Explanation: “configure terminal” (or “conf t”) is the standard command
to enter global configuration mode on ArubaOS-Switch.
Question 2: Which Aruba switch series supports Virtual Switching
Framework (VSF)?
A. 2530
B. 3810M
C. 5400R
D. 2920
Correct: B
,HPE6-A46 Delta-Aruba Certified
Switching Professional Exam
Explanation: The Aruba 3810M series supports Virtual Switching
Framework for stacking and HA.
Question 3: What is the default VLAN ID on Aruba switches?
A. 1
B. 10
C. 100
D. 4094
Correct: A
Explanation: VLAN 1 is the default VLAN for management and untagged
traffic.
Question 4: Which protocol tags VLAN frames on trunks?
A. ISL
B. 802.1Q
C. LACP
D. STP
Correct: B
,HPE6-A46 Delta-Aruba Certified
Switching Professional Exam
Explanation: IEEE 802.1Q inserts 4-byte tags to identify VLAN
membership on trunked links.
Question 5: How do you assign VLAN 20 to interface 1/1/1?
A. vlan 20 interface 1/1/1
B. interface 1/1/1 vlan 20
C. interface 1/1/1 untagged vlan 20
D. vlan 20 untagged 1/1/1
Correct: D
Explanation: “vlan 20 untagged 1/1/1” assigns port 1/1/1 as an
untagged member of VLAN 20.
Question 6: What command shows the VLAN membership table?
A. show vlan
B. show config vlan
C. show vlan brief
D. show vlan database
Correct: C
, HPE6-A46 Delta-Aruba Certified
Switching Professional Exam
Explanation: “show vlan brief” displays VLAN IDs with their
tagged/untagged port lists.
Question 7: Which mode must a port be in to carry multiple VLANs?
A. access
B. hybrid
C. trunk
D. hybrid-access
Correct: C
Explanation: Trunk mode carries multiple VLANs by tagging frames per
802.1Q.
Question 8: Which command configures a native VLAN on a trunk port?
A. vlan native 5 tagged 1/1/1
B. interface 1/1/1 native vlan 5
C. vlan 5 untagged 1/1/1
D. trunk 1/1/1 native 5
Correct: C
