CSWA-S MULTIPLE CHOICE Q-
EXTENDED EDITION (FROM OFFICIAL
GUIDE TO CERTIFIED SOLIDWORKS
ASSOCIATE EXAM) 2025-2026 FROM
OTHER STUDY SETS ETC!!
1 of
114
Term
The cylindrical faces A are only allowed to rotate about their axis. What
Fixture type would you apply to the cylindrical faces?
Fixed.
Roller/Slider.
Fixed Hinge.
On Spherical Face.
Give this one a try later!
, C. C A. A
C. Beam Elements. C. Fixed Hinge.
Don't know?
2 of 114
Term
18. How does SOLIDWORKS Simulation automatically treat a
Sheet metal part with uniform thickness?
A. Shell.
B.Solid.
C. Beam.
D. Mixed Mesh.
Give this one a try later!
A. Shell. A. True.
A. Strain. C. Hinge
Don't know?
3 of 114
,Term
The advanced meshing option "Enable common nodes with
touching boundaries" must be disabled in order to mesh parts
independently in an assembly.
A. True
B.False
Give this one a try later!
A. True B. False
C. 120lb B. 0.2%
Don't know?
4 of 114
Term
45.Set the scale factor for plots ___ to avoid any misinterpretation of
the results, after performing a Static analysis with gap/contact
elements.
A. Equal to 0.
B.Equal to 1.
C. Less than 1.
D.To the Maximum displacement value for the model.
Give this one a try later!
, A. Static only. A. Nodes.
B.Equal to 1. C. 120lb
Don't know?
5 of 114
Term
69.Global size in the Mesh PropertyManager is only available for a
Standard Mesh.
A. True
B.False
Give this one a try later!
A. True. C. Ball
A. True A. Strain.
Don't know?
6 of 114
Term
37.A material is orthographic if its mechanical or thermal
properties are not unique and independent in three mutually
perpendicular
EXTENDED EDITION (FROM OFFICIAL
GUIDE TO CERTIFIED SOLIDWORKS
ASSOCIATE EXAM) 2025-2026 FROM
OTHER STUDY SETS ETC!!
1 of
114
Term
The cylindrical faces A are only allowed to rotate about their axis. What
Fixture type would you apply to the cylindrical faces?
Fixed.
Roller/Slider.
Fixed Hinge.
On Spherical Face.
Give this one a try later!
, C. C A. A
C. Beam Elements. C. Fixed Hinge.
Don't know?
2 of 114
Term
18. How does SOLIDWORKS Simulation automatically treat a
Sheet metal part with uniform thickness?
A. Shell.
B.Solid.
C. Beam.
D. Mixed Mesh.
Give this one a try later!
A. Shell. A. True.
A. Strain. C. Hinge
Don't know?
3 of 114
,Term
The advanced meshing option "Enable common nodes with
touching boundaries" must be disabled in order to mesh parts
independently in an assembly.
A. True
B.False
Give this one a try later!
A. True B. False
C. 120lb B. 0.2%
Don't know?
4 of 114
Term
45.Set the scale factor for plots ___ to avoid any misinterpretation of
the results, after performing a Static analysis with gap/contact
elements.
A. Equal to 0.
B.Equal to 1.
C. Less than 1.
D.To the Maximum displacement value for the model.
Give this one a try later!
, A. Static only. A. Nodes.
B.Equal to 1. C. 120lb
Don't know?
5 of 114
Term
69.Global size in the Mesh PropertyManager is only available for a
Standard Mesh.
A. True
B.False
Give this one a try later!
A. True. C. Ball
A. True A. Strain.
Don't know?
6 of 114
Term
37.A material is orthographic if its mechanical or thermal
properties are not unique and independent in three mutually
perpendicular
