Hazmat Final Exam 2025 Questions and Answers 100% Pass

Hazmat Final Exam 2025 Questions and Answers 100% Pass Identify the three organizations who is local, state, and federal requirements you need to comply with at the HazMat Awareness Level - Occupational safety and health administration (OSHA) Department of transportation (DOT) Environmental protection agency (EPA) When analyzing hazardous materials incident at the awareness level, you are responsible for - Recognizing the presence of hazardous materials The DOT class for radioactive materials is: - 7 DOT class 6, division 1 materials consists of: - Poisonous materials A material that is flammable solid would be classified as a class _________ hazardous material - 4.1 Match each DOT hazard class and division with its description - 1 flammable solid 2 spontaneously combustible material 3 dangerous when wet material The type of material found in DOT class 2, division 2 is a(n): - Liquefied gas 2COPYRIGHT © 2025 BY SOPHIA BENNETT, ALL RIGHTS RESERVED Class 8 of the DOT hazard classification contains - Corrosive materials Identify the truck that can transport liquid petroleum products, such as gasoline and jet fuel - A (White front, silver body) When hazardous materials are being transported by rail, The shipping papers are most likely to be: - With the conductor or engineer Identify the three pieces of information that will be found on all shipping papers - proper shipping name four digit UN/NA number hazard class When analyzing a hazardous materials incident at the awareness level, you are responsible for: - 1 fire and explosion data ( extinguishing medium) 2 reactivity data (incompatibility) 3 Health hazards (exposure hazards) 4 physical data (Solubility in water) The military warning symbol image indicates the: - Presence of a harassing agent Identify four types of locations that could become targets for criminal or terrorist activity using hazardous materials - Military installations Telecommunication facilities Places of historical significance Mass transit systems All of the following may be sensory clues that you k can use to recognize the presence of a hazardous material except: - Looking in the health hazard section of the SDS At a fixed facility, the best places to look for the names of the hazardous materials are the SDS and the: - Emergency planning documents 3COPYRIGHT © 2025 BY SOPHIA BENNETT, ALL RIGHTS RESERVED When analyzing a hazardous materials incident at the awareness level, you are responsible for: - 1 Caused by exposure to extreme temperatures, either hot or cold (thermal) 2 Materials that are toxic to humans if inhaled, swallowed, absorbed, or enter through breaks in the skin (poisonous) 3 Living microscopic organisms, like germs, they can enter the body (etiologic) 4 Can destroy body tissue in contact (Corrosive) Using your sense of smell to identify a hazardous material can put you at risk of exposure by way of: - Inhalation Corrosive material that damages the skin or body tissue is considered exposure by: - Contact The placard image indicates a (a): (Orange placard. Exp