Thermal limits are the direct result of?
A. High torque and power angles
B. The thermal capability of system equipment
C. A reactive power deficiency
D. All of the above
Give this one a try later!
, B. The thermal capability of system equipment
Angle stability limits are the result of?
A. High torque and power angles
B. The thermal capability of system equipment
C. A reactive power deficiency
D. All of the above
Give this one a try later!
A. High torque and power angles
Why would a power transformer's differential relay be equipped with a
harmonic restraint feature?
A. To avoid relay activation when the transformer is first energized
B. To avoid relay activation when the transformer is de-energized
C. To reduce the amount of harmonics created by the power
transformer
D. To restrain the transformer from operating as an overly aggressive
harmonic filter
Give this one a try later!
A. To avoid relay activation when the transformer is first energized
,The high side of a delta-wye connected transformer is connected to a
power system with 199 kV L-G high side voltage. What is the voltage
across the winding of the delta transformer?
A. 199 kV
B. 230 kV
C. 345 kV
D. 500 kV
Give this one a try later!
C. 345 kV
In a DC circuit, a 100 volt battery is connected to both sides of a 2 ohm
resistor. What is the current through the resistor and the power usage of
the resistor?
A. 50 amps / 5000 watts
B. 40 amps / 80 watts
C. 50 amps / 100 watts
D. 40 amps / 3200 watts
Give this one a try later!
A. 50 amps / 5000 watts
A Balancing Authority's frequency bias setting is equal to:
A. The Balancing Authority's frequency response characteristic
(FRC)
B. The natural response of the Balancing Authority
, C. The AGC system's bias value
D. All of the above
Give this one a try later!
D. All of the above
Which type of HVDC system has two conductors, one energized with a
positive voltage and one with a negative voltage?
A. Semipolar
B. Bipolar
C. Unipolar
D. Monopolar
Give this one a try later!
B. Bipolar
Neglecting losses, the difference between a generator's mechanical power
input and electrical power output is called:
A. Relative power
B. Synchronizing power
C. Stability power
D. Accelerating power
Give this one a try later!
D. Accelerating power
A. High torque and power angles
B. The thermal capability of system equipment
C. A reactive power deficiency
D. All of the above
Give this one a try later!
, B. The thermal capability of system equipment
Angle stability limits are the result of?
A. High torque and power angles
B. The thermal capability of system equipment
C. A reactive power deficiency
D. All of the above
Give this one a try later!
A. High torque and power angles
Why would a power transformer's differential relay be equipped with a
harmonic restraint feature?
A. To avoid relay activation when the transformer is first energized
B. To avoid relay activation when the transformer is de-energized
C. To reduce the amount of harmonics created by the power
transformer
D. To restrain the transformer from operating as an overly aggressive
harmonic filter
Give this one a try later!
A. To avoid relay activation when the transformer is first energized
,The high side of a delta-wye connected transformer is connected to a
power system with 199 kV L-G high side voltage. What is the voltage
across the winding of the delta transformer?
A. 199 kV
B. 230 kV
C. 345 kV
D. 500 kV
Give this one a try later!
C. 345 kV
In a DC circuit, a 100 volt battery is connected to both sides of a 2 ohm
resistor. What is the current through the resistor and the power usage of
the resistor?
A. 50 amps / 5000 watts
B. 40 amps / 80 watts
C. 50 amps / 100 watts
D. 40 amps / 3200 watts
Give this one a try later!
A. 50 amps / 5000 watts
A Balancing Authority's frequency bias setting is equal to:
A. The Balancing Authority's frequency response characteristic
(FRC)
B. The natural response of the Balancing Authority
, C. The AGC system's bias value
D. All of the above
Give this one a try later!
D. All of the above
Which type of HVDC system has two conductors, one energized with a
positive voltage and one with a negative voltage?
A. Semipolar
B. Bipolar
C. Unipolar
D. Monopolar
Give this one a try later!
B. Bipolar
Neglecting losses, the difference between a generator's mechanical power
input and electrical power output is called:
A. Relative power
B. Synchronizing power
C. Stability power
D. Accelerating power
Give this one a try later!
D. Accelerating power
