CSMLS Safety Manual
questions and
answers latest top
score.
What are the major ways to deal with risk?
a. ignore them, make employees sign non-liability contracts
b. workers compensation
c. report to government
d. tolerate, treat, terminate or transfer the risk CORRECT ANSWER.D
Name 5 categories of hazards CORRECT ANSWER.Chemical
Biological
Physical
Ergonomic
Psychological
Which of the following may be useful in helping to identify laboratory hazards?
a. Safety data sheets
b. inspections
c. incident reports
d. all of the above CORRECT ANSWER.D
Personal monitoring can be used to measure noise exposure?
A. true
B. false CORRECT ANSWER.A
Standards for all chemicals that identify allowable levels of exposure are
available?
A. true
B. false CORRECT ANSWER.B
,Threshold Limit values were devised to identify the level of risk for the most
sensitive individuals in the workplace.
A. true
B. false CORRECT ANSWER.B
An example of an engineering control is:
a. full body coverage with gown, shoe covers, gloves and goggles
b. strictly enforced safety rules
c. all of the above
d. none of the above CORRECT ANSWER.D
Emergency response plans, training, and occupational health programs are
examples of:
a. engineering controls
b. administrative controls
c. personal protective equipment
d. none of the above CORRECT ANSWER.B
In the hierarchy of controls, which type of control is considered the best?
a. engineering controls
b. administrative controls
c. PPE
d. hiring controls CORRECT ANSWER.A
Task hazard analysis:
a. is required for each job by FEDERAL regulation
b. is a good approach to identify hazards
c. should be done by supervisors and managers rather than workers
d. is not part of an occupational health and safety management
system CORRECT ANSWER.B
The concept in legislation that indicates that employers must do everything
reasonable to protect the health and safety of works is referred to as:
a. the rights of workers
b. refusal of unsafe work
c. due diligence
d. worker's compensation CORRECT ANSWER.C
In the Internal Responsibility System model, management is required to:
a. correct hazards
b. provide training
c. investigate accidents
d. all of the above CORRECT ANSWER.D
In the Internal Responsibility System model, employees are required to:
, a. follow 3rules
b. reduce 3absenteeism
c. belong 3to 3a 3union
d. have 3immunizations 3CORRECT 3ANSWER.A
Canadian 3laboratories 3are 3governed 3by:
a. federal 3legislation
b. provincial 3legislation
c. municipal 3legislation
d. all 3of 3the 3above 3CORRECT 3ANSWER.D
Three 3major 3elements 3of 3WHMIS 3are:
a. SDS, 3training, 3PPE
b. labels, 3training, 3SDS
c. SDS, 3inventory 3control, 3PPE
d. training, 3PPE, 3labels 3CORRECT 3ANSWER.B
The 3Canada 3Criminal 3code 3does 3not 3apply 3to 3laboratories 3or 3medical 3facilities
A. true
B. false 3CORRECT 3ANSWER.B
Record 3keeping 3and 3documentation 3are 3important 3ways 3to 3demonstrate
3enforcement 3and 3accountability
A. true
B. false 3CORRECT 3ANSWER.A
The 3CSA 3group 3has 3published 3standards 3related 3to:
a. fume 3hoods
b. BSC
c. use 3of 3respirators
d. all 3of 3the 3above 3CORRECT 3ANSWER.D
if 3you 3have 3a 3safety 3issue 3that 3you 3cannot 3solve 3you 3should 3first 3contact:
a. the 3government 3health 3and 3safety 3regulatory 3agency
b. the 3media
c. your 3safety 3committee
d. your 3supervisor 3CORRECT 3ANSWER.D
A 3good 3safety 3culture 3promotes:
a. all 3injuries 3are 3preventable
b. employees 3ultimately 3are 3responsible 3for 3safety 3in 3the 3workplace
c. only 3serious 3incidents 3should 3be 3reported
d. unsafe 3workers 3should 3be 3terminated 3CORRECT 3ANSWER.A
A 3hazard 3is 3the 3same 3as 3a 3risk
A. true
questions and
answers latest top
score.
What are the major ways to deal with risk?
a. ignore them, make employees sign non-liability contracts
b. workers compensation
c. report to government
d. tolerate, treat, terminate or transfer the risk CORRECT ANSWER.D
Name 5 categories of hazards CORRECT ANSWER.Chemical
Biological
Physical
Ergonomic
Psychological
Which of the following may be useful in helping to identify laboratory hazards?
a. Safety data sheets
b. inspections
c. incident reports
d. all of the above CORRECT ANSWER.D
Personal monitoring can be used to measure noise exposure?
A. true
B. false CORRECT ANSWER.A
Standards for all chemicals that identify allowable levels of exposure are
available?
A. true
B. false CORRECT ANSWER.B
,Threshold Limit values were devised to identify the level of risk for the most
sensitive individuals in the workplace.
A. true
B. false CORRECT ANSWER.B
An example of an engineering control is:
a. full body coverage with gown, shoe covers, gloves and goggles
b. strictly enforced safety rules
c. all of the above
d. none of the above CORRECT ANSWER.D
Emergency response plans, training, and occupational health programs are
examples of:
a. engineering controls
b. administrative controls
c. personal protective equipment
d. none of the above CORRECT ANSWER.B
In the hierarchy of controls, which type of control is considered the best?
a. engineering controls
b. administrative controls
c. PPE
d. hiring controls CORRECT ANSWER.A
Task hazard analysis:
a. is required for each job by FEDERAL regulation
b. is a good approach to identify hazards
c. should be done by supervisors and managers rather than workers
d. is not part of an occupational health and safety management
system CORRECT ANSWER.B
The concept in legislation that indicates that employers must do everything
reasonable to protect the health and safety of works is referred to as:
a. the rights of workers
b. refusal of unsafe work
c. due diligence
d. worker's compensation CORRECT ANSWER.C
In the Internal Responsibility System model, management is required to:
a. correct hazards
b. provide training
c. investigate accidents
d. all of the above CORRECT ANSWER.D
In the Internal Responsibility System model, employees are required to:
, a. follow 3rules
b. reduce 3absenteeism
c. belong 3to 3a 3union
d. have 3immunizations 3CORRECT 3ANSWER.A
Canadian 3laboratories 3are 3governed 3by:
a. federal 3legislation
b. provincial 3legislation
c. municipal 3legislation
d. all 3of 3the 3above 3CORRECT 3ANSWER.D
Three 3major 3elements 3of 3WHMIS 3are:
a. SDS, 3training, 3PPE
b. labels, 3training, 3SDS
c. SDS, 3inventory 3control, 3PPE
d. training, 3PPE, 3labels 3CORRECT 3ANSWER.B
The 3Canada 3Criminal 3code 3does 3not 3apply 3to 3laboratories 3or 3medical 3facilities
A. true
B. false 3CORRECT 3ANSWER.B
Record 3keeping 3and 3documentation 3are 3important 3ways 3to 3demonstrate
3enforcement 3and 3accountability
A. true
B. false 3CORRECT 3ANSWER.A
The 3CSA 3group 3has 3published 3standards 3related 3to:
a. fume 3hoods
b. BSC
c. use 3of 3respirators
d. all 3of 3the 3above 3CORRECT 3ANSWER.D
if 3you 3have 3a 3safety 3issue 3that 3you 3cannot 3solve 3you 3should 3first 3contact:
a. the 3government 3health 3and 3safety 3regulatory 3agency
b. the 3media
c. your 3safety 3committee
d. your 3supervisor 3CORRECT 3ANSWER.D
A 3good 3safety 3culture 3promotes:
a. all 3injuries 3are 3preventable
b. employees 3ultimately 3are 3responsible 3for 3safety 3in 3the 3workplace
c. only 3serious 3incidents 3should 3be 3reported
d. unsafe 3workers 3should 3be 3terminated 3CORRECT 3ANSWER.A
A 3hazard 3is 3the 3same 3as 3a 3risk
A. true
