NASCLA EXAM QUESTIONS WITH
100% CORRECT ANSWERS||GRADE A+
Operation and maintenance training are performed by? - CORRECT-
ANSWER-The manufacturer's representative
Operation and maintenance manuals are typically organized per the? -
CORRECT-ANSWER-CSI formats
The ---- should be received by the owner when as-built drawings are
delivered - CORRECT-ANSWER-receipt
Do as built drawings need to include the date of installation? -
CORRECT-ANSWER-NO
,CSI Division -- covers finishes? - CORRECT-ANSWER-Div 9
The submittal used to verify that the project materials made contract
specifications is called? - CORRECT-ANSWER-Product data sheets
Is the cost of an item included with the submittal of that item? -
CORRECT-ANSWER-NO
Shop drawings should be kept where? - CORRECT-ANSWER-On the job
site
The original punch list shall be completed before prior notification of
the ----- - CORRECT-ANSWER-engineer or architect
Vibrating concrete causes it to become more ---- - CORRECT-ANSWER-
dense and fluid
,Solitude columns taller than ----- require stiffeners - CORRECT-
ANSWER-15 ft
---- are used to determine if shores are ready to be removed -
CORRECT-ANSWER-Compressive tests
Nominal drying range for veneer plaster is? - CORRECT-ANSWER-80
degrees and 65% humidity
Use --- bugle head screws type ---- screws to attach gypsum wood
framing - CORRECT-ANSWER-1 1/4", type W
The letter to indicate fire code gypsum board is? - CORRECT-ANSWER-X
, --- is used to attach the curing device to the joist supports - CORRECT-
ANSWER-Wiring
The panel identification index 32/16 indicates that it can have a roof
span of --- inches and floor span of ---inches - CORRECT-ANSWER-32
inches, 16 inches
Steel trusses spanning longer than -- feet should be designed by an
engineer - CORRECT-ANSWER-60 feet
Glazing located within --- inches of an operable door is considered a
hazardous location - CORRECT-ANSWER-24 inches
Glazing located less than --- inches above the adjacent walking surface
of a stairway shall be safety glass - CORRECT-ANSWER-60 inches
The minimum slope of a built up roof is? - CORRECT-ANSWER-1/4:12
100% CORRECT ANSWERS||GRADE A+
Operation and maintenance training are performed by? - CORRECT-
ANSWER-The manufacturer's representative
Operation and maintenance manuals are typically organized per the? -
CORRECT-ANSWER-CSI formats
The ---- should be received by the owner when as-built drawings are
delivered - CORRECT-ANSWER-receipt
Do as built drawings need to include the date of installation? -
CORRECT-ANSWER-NO
,CSI Division -- covers finishes? - CORRECT-ANSWER-Div 9
The submittal used to verify that the project materials made contract
specifications is called? - CORRECT-ANSWER-Product data sheets
Is the cost of an item included with the submittal of that item? -
CORRECT-ANSWER-NO
Shop drawings should be kept where? - CORRECT-ANSWER-On the job
site
The original punch list shall be completed before prior notification of
the ----- - CORRECT-ANSWER-engineer or architect
Vibrating concrete causes it to become more ---- - CORRECT-ANSWER-
dense and fluid
,Solitude columns taller than ----- require stiffeners - CORRECT-
ANSWER-15 ft
---- are used to determine if shores are ready to be removed -
CORRECT-ANSWER-Compressive tests
Nominal drying range for veneer plaster is? - CORRECT-ANSWER-80
degrees and 65% humidity
Use --- bugle head screws type ---- screws to attach gypsum wood
framing - CORRECT-ANSWER-1 1/4", type W
The letter to indicate fire code gypsum board is? - CORRECT-ANSWER-X
, --- is used to attach the curing device to the joist supports - CORRECT-
ANSWER-Wiring
The panel identification index 32/16 indicates that it can have a roof
span of --- inches and floor span of ---inches - CORRECT-ANSWER-32
inches, 16 inches
Steel trusses spanning longer than -- feet should be designed by an
engineer - CORRECT-ANSWER-60 feet
Glazing located within --- inches of an operable door is considered a
hazardous location - CORRECT-ANSWER-24 inches
Glazing located less than --- inches above the adjacent walking surface
of a stairway shall be safety glass - CORRECT-ANSWER-60 inches
The minimum slope of a built up roof is? - CORRECT-ANSWER-1/4:12
