Woodshop Safety Test Questions with Correct Answers Latest Update 2025
Safety instructions must be given before you are allowed to work on or operate any machine or ______.
- Answers tool
You are not permitted to work on any equipment or machine if the ________ is not present. - Answers
teacher
Guards and safety devices must be on all machines during ______. - Answers operation
Machinery must not be oiled or adjusted while in ______. - Answers use
A machine must be started and stopped only by the ______. - Answers operator
Do not leave a machine while it is ______. - Answers running
When working on or near any machine or tool where there is a possibility of eye injury, you must wear
_________. - Answers eye protection
You are not permitted within the safety zone around any machine unless you are the ________. -
Answers operator
Loose clothing must be tucked in before you start work, as a precaution against __________. - Answers
getting caught/entangled
If in doubt about any machine, check with the ________. - Answers Teacher
Aisles and working areas must be kept clear of ___________. - Answers all obstructions
The shop floor must be kept free of oil because of the danger of fire and ________. - Answers slipping
Combustible rags must be kept in a closed __________. - Answers red container
Do not lift materials heavier than your ability to handle them ________. - Answers safely
Long pieces of material should be carried by ________. - Answers 2 people
The attention of the teacher should be directed to any violation of _____. - Answers rules
Accidents no matter how slight, must be reported immediately to ___________. - Answers the instructor
Carry sharp pointed tools pointed ________. - Answers downward
Do not leave tools and materials ________ from a vice or a bench. - Answers clamped
A dull tool is dangerous because it will _____. - Answers skip
Pass tools to classmates with the tool handles ____________. - Answers pointing towards them
, Do not stand in front of anyone using a sharp ______. - Answers tool
Carry a hand saw by the handle with the toe __________. - Answers pointed downward
When using a screwdriver, avoid holding the material in the _______. - Answers hand
After clamps have been applied to the work, it should not be ________. - Answers moved
Face shields or goggles/glasses must be worn by shop students when there is a possibility of
__________. - Answers loose debris
Whenever possible, the ________ should be clamped. - Answers project stock
All adjustments should be made before the machine is ________. - Answers turned on
The operator must keep his/her fingers away from the _______ spindle, chuck, and bit. - Answers
spinning
When operating the drill press, ______ the material instead of holding it by hand. - Answers clamp
Before turning on the power, the chuck key should be __________. - Answers removed from the chuck
When the drill begins to break through the work you should ease up on the ________. - Answers
forward pressure
Chips should be removed from the drill press table when the machine is _________. - Answers turned
off
When the drill is being tightened in the chuck, the cord should be _______. - Answers unplugged
The operator should be ready to stop the _______ instantly. - Answers machine
To prevent the work from being caught, the tool rest must be kept within ________ of the grinding
wheel. - Answers 1/8"
Grinding on the ______ of the wheel may produce pressure which can cause the wheel to break. -
Answers edge
When using the buffer, the operator must use ______ to control the work being buffed. - Answers both
hands
The shortest length of stock which may be run over the jointer safely is _______. - Answers 12"
When face planning stock, the operator must always use a __________. - Answers "We don't do that
here."
When face planning, always allow the guard to swing back over the knives before removing the ______.
- Answers "We don't do that here."
Safety instructions must be given before you are allowed to work on or operate any machine or ______.
- Answers tool
You are not permitted to work on any equipment or machine if the ________ is not present. - Answers
teacher
Guards and safety devices must be on all machines during ______. - Answers operation
Machinery must not be oiled or adjusted while in ______. - Answers use
A machine must be started and stopped only by the ______. - Answers operator
Do not leave a machine while it is ______. - Answers running
When working on or near any machine or tool where there is a possibility of eye injury, you must wear
_________. - Answers eye protection
You are not permitted within the safety zone around any machine unless you are the ________. -
Answers operator
Loose clothing must be tucked in before you start work, as a precaution against __________. - Answers
getting caught/entangled
If in doubt about any machine, check with the ________. - Answers Teacher
Aisles and working areas must be kept clear of ___________. - Answers all obstructions
The shop floor must be kept free of oil because of the danger of fire and ________. - Answers slipping
Combustible rags must be kept in a closed __________. - Answers red container
Do not lift materials heavier than your ability to handle them ________. - Answers safely
Long pieces of material should be carried by ________. - Answers 2 people
The attention of the teacher should be directed to any violation of _____. - Answers rules
Accidents no matter how slight, must be reported immediately to ___________. - Answers the instructor
Carry sharp pointed tools pointed ________. - Answers downward
Do not leave tools and materials ________ from a vice or a bench. - Answers clamped
A dull tool is dangerous because it will _____. - Answers skip
Pass tools to classmates with the tool handles ____________. - Answers pointing towards them
, Do not stand in front of anyone using a sharp ______. - Answers tool
Carry a hand saw by the handle with the toe __________. - Answers pointed downward
When using a screwdriver, avoid holding the material in the _______. - Answers hand
After clamps have been applied to the work, it should not be ________. - Answers moved
Face shields or goggles/glasses must be worn by shop students when there is a possibility of
__________. - Answers loose debris
Whenever possible, the ________ should be clamped. - Answers project stock
All adjustments should be made before the machine is ________. - Answers turned on
The operator must keep his/her fingers away from the _______ spindle, chuck, and bit. - Answers
spinning
When operating the drill press, ______ the material instead of holding it by hand. - Answers clamp
Before turning on the power, the chuck key should be __________. - Answers removed from the chuck
When the drill begins to break through the work you should ease up on the ________. - Answers
forward pressure
Chips should be removed from the drill press table when the machine is _________. - Answers turned
off
When the drill is being tightened in the chuck, the cord should be _______. - Answers unplugged
The operator should be ready to stop the _______ instantly. - Answers machine
To prevent the work from being caught, the tool rest must be kept within ________ of the grinding
wheel. - Answers 1/8"
Grinding on the ______ of the wheel may produce pressure which can cause the wheel to break. -
Answers edge
When using the buffer, the operator must use ______ to control the work being buffed. - Answers both
hands
The shortest length of stock which may be run over the jointer safely is _______. - Answers 12"
When face planning stock, the operator must always use a __________. - Answers "We don't do that
here."
When face planning, always allow the guard to swing back over the knives before removing the ______.
- Answers "We don't do that here."
