Delta Airlines
A class B fire extinguisher is used to fight what kind of fire?
a. Flammable liquid fire
b. Paper fire
c. Electrical fire
d. Wood fire - ANS-A Flammable liquid fire B(Boil)
How far away should you stay away from engines to avoid suction? - ANS-15 Feet away/
Above idle speed 25 feet away
What is Jet Blast? - ANS-When air blows out the back of the engines
What is the blast area of jet blast? - ANS-250 Feet
What is two hazards of jet blast - ANS-Temp & Velocity
Never stand where, While jet engines are on? - ANS-In the front or back of the plane
Air craft engines can cause what - ANS-Hearing loss and disorientation
What does FOD stand for? - ANS-Foreign Object Debris
What are 4 examples of FOD? - ANS-Bolts, Rocks, luggage tags, zippers
If Fod is seen on the ramp how should it be disposed of - ANS-Throw it away in a garbage can
and make sure lid is shut
What are the guidelines for approaching an aircraft? - ANS-1. Look to see if an engine has
begun to spool down
2. Look to see if an aircraft's beacon light is off
How is spool down identified? - ANS-Visible white swirl markings on the intlet cone and/or fan
blades become visible.
How else can spool down be identified? - ANS-By the sound of the engine
, Aircraft Beacon Lights will flash when.... - ANS-1. The engines are about to start
2.The engines are running
3. The aircraft is about to move
4. The hydraulics are activated.
5. The aircraft is pressurized
6. Other maintenance functions
Which air crafts do not require the beacon lights to be off before approaching an aircraft? -
ANS-DC Carriers
Personnel are not allowed to approach dc carriers until when? - ANS-The engines have been
turned off
Wing walkers must remain where while the engines spool down? - ANS-At the wing tips of the
plane and not approach until engines have spooled down.
Where will the marshall Stand? - ANS-In the vicinity of nose gear going no further than the
fuslage than the power connection point until the engines have begun to spool down and the
engine lights are off
What are two saftey areas to be aware of? - ANS-Safety zones and safety diamonds.
What are safety zones used for? - ANS-To mark the clear area which must remain clear of
ground support equipment (GSE) and must cover the entire foot print of the aircraft
Safety zones ensure what? - ANS-That the aircraft will not contact (GSE) during taxi in or push
back
(GSE) may on be placed in the safety zone if what? - ANS-if its placed within designated
parking ares defined by white lines
Brakes need to be what prior to coming into a safety zone? - ANS-Tested
A safety cone and/or nose gear chock will be positioned where? - ANS-At the nose gear stop
point
Main gear chocks are not permitted where? - ANS-Inside the safety zone
Equipment must not come within how many feet of an air craft - ANS-5 feet
Equipment that must not come within 5 feet of an aircraft is known as what? - ANS-No drive
zone
Safety diamonds are a no drive zone True or False - ANS-True
A class B fire extinguisher is used to fight what kind of fire?
a. Flammable liquid fire
b. Paper fire
c. Electrical fire
d. Wood fire - ANS-A Flammable liquid fire B(Boil)
How far away should you stay away from engines to avoid suction? - ANS-15 Feet away/
Above idle speed 25 feet away
What is Jet Blast? - ANS-When air blows out the back of the engines
What is the blast area of jet blast? - ANS-250 Feet
What is two hazards of jet blast - ANS-Temp & Velocity
Never stand where, While jet engines are on? - ANS-In the front or back of the plane
Air craft engines can cause what - ANS-Hearing loss and disorientation
What does FOD stand for? - ANS-Foreign Object Debris
What are 4 examples of FOD? - ANS-Bolts, Rocks, luggage tags, zippers
If Fod is seen on the ramp how should it be disposed of - ANS-Throw it away in a garbage can
and make sure lid is shut
What are the guidelines for approaching an aircraft? - ANS-1. Look to see if an engine has
begun to spool down
2. Look to see if an aircraft's beacon light is off
How is spool down identified? - ANS-Visible white swirl markings on the intlet cone and/or fan
blades become visible.
How else can spool down be identified? - ANS-By the sound of the engine
, Aircraft Beacon Lights will flash when.... - ANS-1. The engines are about to start
2.The engines are running
3. The aircraft is about to move
4. The hydraulics are activated.
5. The aircraft is pressurized
6. Other maintenance functions
Which air crafts do not require the beacon lights to be off before approaching an aircraft? -
ANS-DC Carriers
Personnel are not allowed to approach dc carriers until when? - ANS-The engines have been
turned off
Wing walkers must remain where while the engines spool down? - ANS-At the wing tips of the
plane and not approach until engines have spooled down.
Where will the marshall Stand? - ANS-In the vicinity of nose gear going no further than the
fuslage than the power connection point until the engines have begun to spool down and the
engine lights are off
What are two saftey areas to be aware of? - ANS-Safety zones and safety diamonds.
What are safety zones used for? - ANS-To mark the clear area which must remain clear of
ground support equipment (GSE) and must cover the entire foot print of the aircraft
Safety zones ensure what? - ANS-That the aircraft will not contact (GSE) during taxi in or push
back
(GSE) may on be placed in the safety zone if what? - ANS-if its placed within designated
parking ares defined by white lines
Brakes need to be what prior to coming into a safety zone? - ANS-Tested
A safety cone and/or nose gear chock will be positioned where? - ANS-At the nose gear stop
point
Main gear chocks are not permitted where? - ANS-Inside the safety zone
Equipment must not come within how many feet of an air craft - ANS-5 feet
Equipment that must not come within 5 feet of an aircraft is known as what? - ANS-No drive
zone
Safety diamonds are a no drive zone True or False - ANS-True
