AVIXA CTS Sample Questions and
Answers
What is the BEST way to determine how reverberant a space is? - Correct Answers -
Use an RT60 meter
The correct time to discuss visible finishes for wall plates, surface mount speakers, and
wall mounted screen casings is during the: - Correct Answers -Site Survey
Speak with the client about getting more information on how to address the noise
source. - Correct Answers -While surveying a conference room for a system upgrade,
an engineer measures 55 dB SPL A-wtd of ambient noise when the room is empty. How
should they proceed? -Add voice lift to the system proposal
Divisible Room - Correct Answers -A client needs to add videoconferencing functionality
for high-level, private meetings. Which of following planned space types should you
advise be ruled out?
The Design Phase - Correct Answers -Which phase of an AV project comes
immediately AFTER the Program Phase?
Detailed list of equipment - Correct Answers -Which is NOT presented in the program
report:
An overview of the programming process including who was surveyed during the
process. - Correct Answers -When preparing an executive summary what should be
included for submittal to the client?
Additive color system - Correct Answers -Which system is used to show colors from a
video display?
- Correct Answers -__ is the process of examining methods, techniques, and principles
from peer organizations and facilities. Schematic Design Punching a system
Benchmarking Schematic Design
- Correct Answers -The document which is presented to the end user as a summary of
the need analysis and site survey is called the: Scope Review AV Guidelines Document
Program Report Customer Site Documentation Report
, - Correct Answers -When establishing initial contact with a client, try to develop a
relationship early on with the: Chief operating officer Information technology manager
Stakeholders Purchasing manager
- Correct Answers -What document provides a detailed record of all repairs and service
work associated with the Audio Visual systems? Service Manual Repair Guide
Maintenance Log As Built Drawings
An installed audio system should be AT LEAST __________ above the ambient noise
floor. - Correct Answers --25dB
A device is controlled using the pictured cable. What is the MOST LIKELY method of
controlling this device? - Correct Answers -RS-232
The minimum load safety rating for mounting audio visual equipment is: - Correct
Answers -5:1
As part of regular system maintenance, when is the BEST time to update device
firmware? - Correct Answers -On Friday afternoons.
The brightness controls on a display adjusts which level? - Correct Answers -Black
Level
When verifying a display system, which of the following should be used to determine if it
meets a specified contrast ratio? - Correct Answers -Spot Photometer
When working with a client to design an AV solution for a new conference center, the
client requests a detailed budget for the equipment and installation. In what phase does
this occur? - Correct Answers -Design Phase
An owner representative contests an invoice that was mailed after an emergency
service call which had determined the problem was "operator error". Which of the
following is *least* likely to prevent this type of misunderstanding? - Correct Answers -
Predetermine the there is no need for service agreement given predicted mean time
between failure for a TV
A client indicates that they are experiencing video dropouts in a room. Which of the
following is the BEST item for a technician to use when evaluating the system? -
Correct Answers -Test pattern generator/ HDCP generator
A junior level technician observes a senior level technician occasionally taking a pen
like device out of her shirt pocket and laying it along other cables in the area of where
they are working. What might the senior technician be doing? - Correct Answers -Using
a non-contact voltage detector to verify AC high voltage is not present
Answers
What is the BEST way to determine how reverberant a space is? - Correct Answers -
Use an RT60 meter
The correct time to discuss visible finishes for wall plates, surface mount speakers, and
wall mounted screen casings is during the: - Correct Answers -Site Survey
Speak with the client about getting more information on how to address the noise
source. - Correct Answers -While surveying a conference room for a system upgrade,
an engineer measures 55 dB SPL A-wtd of ambient noise when the room is empty. How
should they proceed? -Add voice lift to the system proposal
Divisible Room - Correct Answers -A client needs to add videoconferencing functionality
for high-level, private meetings. Which of following planned space types should you
advise be ruled out?
The Design Phase - Correct Answers -Which phase of an AV project comes
immediately AFTER the Program Phase?
Detailed list of equipment - Correct Answers -Which is NOT presented in the program
report:
An overview of the programming process including who was surveyed during the
process. - Correct Answers -When preparing an executive summary what should be
included for submittal to the client?
Additive color system - Correct Answers -Which system is used to show colors from a
video display?
- Correct Answers -__ is the process of examining methods, techniques, and principles
from peer organizations and facilities. Schematic Design Punching a system
Benchmarking Schematic Design
- Correct Answers -The document which is presented to the end user as a summary of
the need analysis and site survey is called the: Scope Review AV Guidelines Document
Program Report Customer Site Documentation Report
, - Correct Answers -When establishing initial contact with a client, try to develop a
relationship early on with the: Chief operating officer Information technology manager
Stakeholders Purchasing manager
- Correct Answers -What document provides a detailed record of all repairs and service
work associated with the Audio Visual systems? Service Manual Repair Guide
Maintenance Log As Built Drawings
An installed audio system should be AT LEAST __________ above the ambient noise
floor. - Correct Answers --25dB
A device is controlled using the pictured cable. What is the MOST LIKELY method of
controlling this device? - Correct Answers -RS-232
The minimum load safety rating for mounting audio visual equipment is: - Correct
Answers -5:1
As part of regular system maintenance, when is the BEST time to update device
firmware? - Correct Answers -On Friday afternoons.
The brightness controls on a display adjusts which level? - Correct Answers -Black
Level
When verifying a display system, which of the following should be used to determine if it
meets a specified contrast ratio? - Correct Answers -Spot Photometer
When working with a client to design an AV solution for a new conference center, the
client requests a detailed budget for the equipment and installation. In what phase does
this occur? - Correct Answers -Design Phase
An owner representative contests an invoice that was mailed after an emergency
service call which had determined the problem was "operator error". Which of the
following is *least* likely to prevent this type of misunderstanding? - Correct Answers -
Predetermine the there is no need for service agreement given predicted mean time
between failure for a TV
A client indicates that they are experiencing video dropouts in a room. Which of the
following is the BEST item for a technician to use when evaluating the system? -
Correct Answers -Test pattern generator/ HDCP generator
A junior level technician observes a senior level technician occasionally taking a pen
like device out of her shirt pocket and laying it along other cables in the area of where
they are working. What might the senior technician be doing? - Correct Answers -Using
a non-contact voltage detector to verify AC high voltage is not present
