JLTV course QUESTIONS AND
ANSWERS (GRADED A+)
It reduces the possibility of the chain links gouging into the tires - ANSWERWhen
driving a JLTV equipped with tire chains , why is it desirable to allow the chains to
creep or move on the free ?
Which CTIS setting would you use to operate in standard soft sand conditions ? -
ANSWERMSS
Explain how operating in mud can degrade the JLTV's performance -
ANSWERAnswer : Operating in mud can inject muda , such as aces , versal onts ,
sering mechanism and radiator , which can harden and prevent normal operation
also cause the brake pads
When traversing through sand , snow , or mud , which of the following diving
techniques is recommended ? - ANSWERKeep a steady throttle and momentum
Traversing a rough or uneven surface causes a vehicle to react by the largest
regularites - ANSWERCleaning away from
Accelerate through the turn and gently steer into the direction of the weight transfer
the throttle and gently steer into the tum - ANSWERthe throttle and gently steer into
the direction of the weight transfer
20. You are approaching a 4 - way stop . Without the aid of your A - driver , do you
have adequate field of view to safely navigate a left - hand tum ? Why or why not ? -
ANSWERNo. Because the driver does not have a clear field of view to the right side
of the vehicle
Location , terrain conditions , gross weight of the disabled vehicle , and the mine
level all contribute to the - ANSWERrolling resistance
What recovery options are available if your JLTV exceeds a mire level 17 Select all
that apply - ANSWERC. Le vehicle recovery D. Seek additional recovery assistance
or follow unt SOP procedures
Why must your sating be configured property REFORE diving on soft sol ? -
ANSWERWithout proper configuration the JLTVS chance of becoming stuck or more
increases
What is the key difference between driving on flat terrain and siopes ? -
ANSWERTraction
Oversteer is corrected by steering into the direction that the vehicle is spinning while
vehicle speed - ANSWERreducing
ANSWERS (GRADED A+)
It reduces the possibility of the chain links gouging into the tires - ANSWERWhen
driving a JLTV equipped with tire chains , why is it desirable to allow the chains to
creep or move on the free ?
Which CTIS setting would you use to operate in standard soft sand conditions ? -
ANSWERMSS
Explain how operating in mud can degrade the JLTV's performance -
ANSWERAnswer : Operating in mud can inject muda , such as aces , versal onts ,
sering mechanism and radiator , which can harden and prevent normal operation
also cause the brake pads
When traversing through sand , snow , or mud , which of the following diving
techniques is recommended ? - ANSWERKeep a steady throttle and momentum
Traversing a rough or uneven surface causes a vehicle to react by the largest
regularites - ANSWERCleaning away from
Accelerate through the turn and gently steer into the direction of the weight transfer
the throttle and gently steer into the tum - ANSWERthe throttle and gently steer into
the direction of the weight transfer
20. You are approaching a 4 - way stop . Without the aid of your A - driver , do you
have adequate field of view to safely navigate a left - hand tum ? Why or why not ? -
ANSWERNo. Because the driver does not have a clear field of view to the right side
of the vehicle
Location , terrain conditions , gross weight of the disabled vehicle , and the mine
level all contribute to the - ANSWERrolling resistance
What recovery options are available if your JLTV exceeds a mire level 17 Select all
that apply - ANSWERC. Le vehicle recovery D. Seek additional recovery assistance
or follow unt SOP procedures
Why must your sating be configured property REFORE diving on soft sol ? -
ANSWERWithout proper configuration the JLTVS chance of becoming stuck or more
increases
What is the key difference between driving on flat terrain and siopes ? -
ANSWERTraction
Oversteer is corrected by steering into the direction that the vehicle is spinning while
vehicle speed - ANSWERreducing
