CSX Conductor Final Review Set
2024/2025 Exam Questions and Answers
| 100% Pass
300.3 What is the speed that permits stopping within 1/2 field of vision, and
also permits stopping short of a train, car, on track equipment, and permits
looking out for broken rail while not exceeding 15 mph over switches,
otherwise not exceeding 20mph? - 🧠 ANSWER ✔✔Restricted Speed
6104 Your key train has arrived at Midway Yard to make a pickup of 20
cars on the head end of the train. After adding the cars and making the
appropriate brake test, what documents must be updated before departing?
- 🧠 ANSWER ✔✔CT-168
4509 T/F When a yardmaster is on duty, do not enter a yard or terminal
without notifying them of any Clearance implicated shipments in your train.
- 🧠 ANSWER ✔✔True
4505.1 When handling a train with one or more clearance implicated
shipments, what instructions must be included as part of the train
COPYRIGHT©NINJANERD 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY
1
STATEMENT. ALL RIGHTS RESERVED
,documents if the shipment was not authorized verbally? - 🧠 ANSWER
✔✔Clearance Bureau Instructions
301.2 your train is authorized on the Atlanta subdivision at 50mph. While
descending the grade, you exceed the speed on a grade to 53mph. What
action is required? - 🧠 ANSWER ✔✔Instruct engineer to slow down to
authorized speeds
301.2 S/A your train is authorized at 40mph due to a temporary restricted
speed due to an authorized shipment. You exceed that by 7mph. Select all
that are required. - 🧠 ANSWER ✔✔1) Direct the engineer to stop and
report to the proper authority
2) Do not proceed until released by proper authority
401.3 S/A Rolling equipment must not foul track until it can be visually
determined that? - 🧠 ANSWER ✔✔1) The intended route is clear
2) Switches and derails connected with the movement are properly aligned
407.1 S/A You have been instructed by the yardmaster to leave cars in
track R14 where the clearance points are not identified or visible. Identify
the steps required to determine the clearance point. - 🧠 ANSWER ✔✔1)
COPYRIGHT©NINJANERD 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY
2
STATEMENT. ALL RIGHTS RESERVED
, Standing outside the rail and off the end of crossties, extend your arm
towards the equipment
2) Position the equipment an additional 50' car length into track where it
can no longer be touched.
401.8 S/A After operating a switch or derail, a switch must be properly
aligned and checked for proper fitment of the switch points. What else is
true? - 🧠 ANSWER ✔✔1) Ensure that the lever is latched
2) Device is locked if equipped
406.8 S/A When shoving for a purpose other than making a coupling, you,
must stop 50' short of a: - 🧠 ANSWER ✔✔1) Derail
2) Improperly lined switch
308.1 S/A Train Q79510 is operating in CP territory with a max speed of
60mph, when the train has an undesired emergency. After inspection, the
conductor relaces the air hoses. After contacting the train dispatcher, how
must the train proceed? - 🧠 ANSWER ✔✔1) Train must not exceed 20mph
for 1 additional train length
2) Train must be governed by the rules of that territory
COPYRIGHT©NINJANERD 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY
3
STATEMENT. ALL RIGHTS RESERVED
2024/2025 Exam Questions and Answers
| 100% Pass
300.3 What is the speed that permits stopping within 1/2 field of vision, and
also permits stopping short of a train, car, on track equipment, and permits
looking out for broken rail while not exceeding 15 mph over switches,
otherwise not exceeding 20mph? - 🧠 ANSWER ✔✔Restricted Speed
6104 Your key train has arrived at Midway Yard to make a pickup of 20
cars on the head end of the train. After adding the cars and making the
appropriate brake test, what documents must be updated before departing?
- 🧠 ANSWER ✔✔CT-168
4509 T/F When a yardmaster is on duty, do not enter a yard or terminal
without notifying them of any Clearance implicated shipments in your train.
- 🧠 ANSWER ✔✔True
4505.1 When handling a train with one or more clearance implicated
shipments, what instructions must be included as part of the train
COPYRIGHT©NINJANERD 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY
1
STATEMENT. ALL RIGHTS RESERVED
,documents if the shipment was not authorized verbally? - 🧠 ANSWER
✔✔Clearance Bureau Instructions
301.2 your train is authorized on the Atlanta subdivision at 50mph. While
descending the grade, you exceed the speed on a grade to 53mph. What
action is required? - 🧠 ANSWER ✔✔Instruct engineer to slow down to
authorized speeds
301.2 S/A your train is authorized at 40mph due to a temporary restricted
speed due to an authorized shipment. You exceed that by 7mph. Select all
that are required. - 🧠 ANSWER ✔✔1) Direct the engineer to stop and
report to the proper authority
2) Do not proceed until released by proper authority
401.3 S/A Rolling equipment must not foul track until it can be visually
determined that? - 🧠 ANSWER ✔✔1) The intended route is clear
2) Switches and derails connected with the movement are properly aligned
407.1 S/A You have been instructed by the yardmaster to leave cars in
track R14 where the clearance points are not identified or visible. Identify
the steps required to determine the clearance point. - 🧠 ANSWER ✔✔1)
COPYRIGHT©NINJANERD 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY
2
STATEMENT. ALL RIGHTS RESERVED
, Standing outside the rail and off the end of crossties, extend your arm
towards the equipment
2) Position the equipment an additional 50' car length into track where it
can no longer be touched.
401.8 S/A After operating a switch or derail, a switch must be properly
aligned and checked for proper fitment of the switch points. What else is
true? - 🧠 ANSWER ✔✔1) Ensure that the lever is latched
2) Device is locked if equipped
406.8 S/A When shoving for a purpose other than making a coupling, you,
must stop 50' short of a: - 🧠 ANSWER ✔✔1) Derail
2) Improperly lined switch
308.1 S/A Train Q79510 is operating in CP territory with a max speed of
60mph, when the train has an undesired emergency. After inspection, the
conductor relaces the air hoses. After contacting the train dispatcher, how
must the train proceed? - 🧠 ANSWER ✔✔1) Train must not exceed 20mph
for 1 additional train length
2) Train must be governed by the rules of that territory
COPYRIGHT©NINJANERD 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY
3
STATEMENT. ALL RIGHTS RESERVED
