NDI all CDC Study Guide Exam
Questions And Actual Answers.
Technical orders (TO) provide all of the following to the inspection operation, maintenance, and
modification of Air Force equipment and material except - Answer Policy Directives
Simply Stated a technical order (to) is to be considered? - Answer A military order
Technical orders (to) are established, numbered, and issued in accordance with which to? -
Answer 00-5-1
Which type of technical order (to) covers installation, operation, troubleshooting, repairing,
removing, calibration and servicing or handling of Air Force military systems? - Answer
Operations and maintenance TOs
Enhanced technical information system (ETIMS) provides a direct on-line connectivity from
every base into the management system to allow all except - Answer Most current publication
date
To find the most current publication date of a technical order TO check - Answer The TO index
The maintenance integrated data system (MIDAS) is - Answer A six-digit numbering system
expressed as three elements of two divers each.
What information does the non Destructive Inspection (NDI) general systems (GS) manual
provide? - Answer Inspections
What type of equipment manual would contain equipment calibration requirements? - Answer
Operational and service manual
A group assembly parts list has several part numbers listed for a part you need. To determine
which part number is right for your aircraft refer to the - Answer Usable on Code column
Where would you find information for recording and reporting a nondestructive inspection
,While doing a job you find a mistake in a technical order (TO). Correcting this requires initiation
of a technical manual change recommendation and reply form. Who is responsible for this
action? - Answer You
Which change Recommendation priority MUST be answered within 40 calendar days? - Answer
Urgent
Which type of chance recommendation priority improvements to correct potential hazards? -
Answer Routine
Electronic technical orders (TO) are filed identified by a media distribution code suffix of. -
Answer WA-n
You need to order a new technical order (TO) for personal use on a regular basis; how would
you accomplish this action? - Answer Establish an ID requirement
The technical order (TO) listing for your shops operational TO file will show you all of the
following except - Answer Who currently has one signed out
Responsibility for consolidating technical order (TO) requests on an installation rests with the -
Answer Personal in the TODO
With few exceptions, you must file technical orders (TO) within a maximum of - Answer Five
WORKING days of receipt
A technical order (TO) effective date is - Answer Later than the basic date
In which technical order (TO) chapter would you find page 4-2? - Answer 4
File technical order (TO) supplements in - Answer Reverse numerical order in front of the basic
TO
Enhanced Technical Information Managment System (ETIMS) will be updated automatically in
no more than how many days? - Answer 7 Calendar days
, The purpose of the Air Force supply system is to - Answer Provide a means of purchasing,
distributing, and controlling equipment/supplies used by the Air Force.
Which system is used to determine whether your non Destructive Inspection (NDI) laboratory is
authorized a piece of equipment? - Answer AFEMS
Which form is used to request an item not listed in the federal supply system? - Answer DD
Form 1348-6
Which condition tag would be placed on an eddy current unit being sent back to depot for
repair? - Answer Green DD Form 1577-2
All are requirements for an initial journeyman skill level EXCEPT - Answer Complete 9 months
of on the job training
From the lowest to the highest, what are the three levels of maintenance capability? - Answer
Organizational, intermediate, depot
Which level of maintenance involves major repairs and overhaul? - Answer Depot
Which inspection involves a thorough and searching review of an entire weapon system? -
Answer Periodic (PE)
Which inspection attempts to minimize the length of time an aircraft is down for inspection? -
Answer Phase (PH)
Which inspection is based on calendar days? - Answer Isochronal (ISO)
Which maintenance symbol would be used to indicate a scheduled periodic (PE) inspection is
overdue? - Answer Red dash
Which symbol signifies that an unsatisfactory condition exists? - Answer Red diagonal
Category I deficiency reports (DR) are NOT USED to report conditions - Answer Resulting in non
Questions And Actual Answers.
Technical orders (TO) provide all of the following to the inspection operation, maintenance, and
modification of Air Force equipment and material except - Answer Policy Directives
Simply Stated a technical order (to) is to be considered? - Answer A military order
Technical orders (to) are established, numbered, and issued in accordance with which to? -
Answer 00-5-1
Which type of technical order (to) covers installation, operation, troubleshooting, repairing,
removing, calibration and servicing or handling of Air Force military systems? - Answer
Operations and maintenance TOs
Enhanced technical information system (ETIMS) provides a direct on-line connectivity from
every base into the management system to allow all except - Answer Most current publication
date
To find the most current publication date of a technical order TO check - Answer The TO index
The maintenance integrated data system (MIDAS) is - Answer A six-digit numbering system
expressed as three elements of two divers each.
What information does the non Destructive Inspection (NDI) general systems (GS) manual
provide? - Answer Inspections
What type of equipment manual would contain equipment calibration requirements? - Answer
Operational and service manual
A group assembly parts list has several part numbers listed for a part you need. To determine
which part number is right for your aircraft refer to the - Answer Usable on Code column
Where would you find information for recording and reporting a nondestructive inspection
,While doing a job you find a mistake in a technical order (TO). Correcting this requires initiation
of a technical manual change recommendation and reply form. Who is responsible for this
action? - Answer You
Which change Recommendation priority MUST be answered within 40 calendar days? - Answer
Urgent
Which type of chance recommendation priority improvements to correct potential hazards? -
Answer Routine
Electronic technical orders (TO) are filed identified by a media distribution code suffix of. -
Answer WA-n
You need to order a new technical order (TO) for personal use on a regular basis; how would
you accomplish this action? - Answer Establish an ID requirement
The technical order (TO) listing for your shops operational TO file will show you all of the
following except - Answer Who currently has one signed out
Responsibility for consolidating technical order (TO) requests on an installation rests with the -
Answer Personal in the TODO
With few exceptions, you must file technical orders (TO) within a maximum of - Answer Five
WORKING days of receipt
A technical order (TO) effective date is - Answer Later than the basic date
In which technical order (TO) chapter would you find page 4-2? - Answer 4
File technical order (TO) supplements in - Answer Reverse numerical order in front of the basic
TO
Enhanced Technical Information Managment System (ETIMS) will be updated automatically in
no more than how many days? - Answer 7 Calendar days
, The purpose of the Air Force supply system is to - Answer Provide a means of purchasing,
distributing, and controlling equipment/supplies used by the Air Force.
Which system is used to determine whether your non Destructive Inspection (NDI) laboratory is
authorized a piece of equipment? - Answer AFEMS
Which form is used to request an item not listed in the federal supply system? - Answer DD
Form 1348-6
Which condition tag would be placed on an eddy current unit being sent back to depot for
repair? - Answer Green DD Form 1577-2
All are requirements for an initial journeyman skill level EXCEPT - Answer Complete 9 months
of on the job training
From the lowest to the highest, what are the three levels of maintenance capability? - Answer
Organizational, intermediate, depot
Which level of maintenance involves major repairs and overhaul? - Answer Depot
Which inspection involves a thorough and searching review of an entire weapon system? -
Answer Periodic (PE)
Which inspection attempts to minimize the length of time an aircraft is down for inspection? -
Answer Phase (PH)
Which inspection is based on calendar days? - Answer Isochronal (ISO)
Which maintenance symbol would be used to indicate a scheduled periodic (PE) inspection is
overdue? - Answer Red dash
Which symbol signifies that an unsatisfactory condition exists? - Answer Red diagonal
Category I deficiency reports (DR) are NOT USED to report conditions - Answer Resulting in non
