FTT 111-9352 Exam Questions and
Answers 100% Pass
light strike - ✔✔A light strike occurs when the fir- ing pin or striker does
not have enough energy to ignite the priming compound.
Positive - ✔✔Which type of sear engagement is considered to be the safest?
With no rounds or snap caps - ✔✔The initial function check is to be done:
To check the hammer/sear engagement. - ✔✔What would be the purpose
to tap a pistol's external hammer with a rubber mallet?
False - ✔✔Manual actions require the operator to use a moderate to heavy
force to close the breech.
True - ✔✔With a fixed ejector, you must quickly manipulate the action to
ensure the round is properly ejected.
1
1
100% Pass Guarantee Katelyn Whitman, All Rights
,2
3
4
5
6
7
8 - ✔✔-With snap caps in the chamber, set the safety/selector in the "safe"
position.
-Depress the trigger; it will not move.
-Release the trigger and move to the "fire" position.
-Depress the trigger again. The hammer/striker will produce an audible
"click"
-Continue to depress the trigger. Manually cycle the action and eject the
snap cap.
2
100% Pass Guarantee Katelyn Whitman, All Rights
, -Release the trigger. An audible reset will be heard but the hammer/striker
should not move.
-Use a nylon or rubber hammer and tap the receiver or action.
-Set the safety and/or selector to the "safe" position; nothing should
happen.
False - ✔✔Too little headspace can result in the case expanding too much,
which may lead to an explosion in the chamber.
Feeding device, action parts, and ammunition - ✔✔Which of the following
contribute to a failure to feed?
Rime of the case
Leading edge of the mouth
Top of the belt of the case
Datum line, or near the center of the shoulder - ✔✔-Rimfire
-Centerfire pistol cartridge
-Belted magnum cartridge
3
100% Pass Guarantee Katelyn Whitman, All Rights
Answers 100% Pass
light strike - ✔✔A light strike occurs when the fir- ing pin or striker does
not have enough energy to ignite the priming compound.
Positive - ✔✔Which type of sear engagement is considered to be the safest?
With no rounds or snap caps - ✔✔The initial function check is to be done:
To check the hammer/sear engagement. - ✔✔What would be the purpose
to tap a pistol's external hammer with a rubber mallet?
False - ✔✔Manual actions require the operator to use a moderate to heavy
force to close the breech.
True - ✔✔With a fixed ejector, you must quickly manipulate the action to
ensure the round is properly ejected.
1
1
100% Pass Guarantee Katelyn Whitman, All Rights
,2
3
4
5
6
7
8 - ✔✔-With snap caps in the chamber, set the safety/selector in the "safe"
position.
-Depress the trigger; it will not move.
-Release the trigger and move to the "fire" position.
-Depress the trigger again. The hammer/striker will produce an audible
"click"
-Continue to depress the trigger. Manually cycle the action and eject the
snap cap.
2
100% Pass Guarantee Katelyn Whitman, All Rights
, -Release the trigger. An audible reset will be heard but the hammer/striker
should not move.
-Use a nylon or rubber hammer and tap the receiver or action.
-Set the safety and/or selector to the "safe" position; nothing should
happen.
False - ✔✔Too little headspace can result in the case expanding too much,
which may lead to an explosion in the chamber.
Feeding device, action parts, and ammunition - ✔✔Which of the following
contribute to a failure to feed?
Rime of the case
Leading edge of the mouth
Top of the belt of the case
Datum line, or near the center of the shoulder - ✔✔-Rimfire
-Centerfire pistol cartridge
-Belted magnum cartridge
3
100% Pass Guarantee Katelyn Whitman, All Rights
