OSHA-10 Module 3 Fall Protection Exam
Questions and Answers 100% Pass
Covers located on roadways and vehicular aisles shall be capable of supporting ,
without failure, at least - ✔✔Twice the maximum axle load of the largest vehicle
expected to cross over the cover.
Accidents involving falls are: - ✔✔Generally complex events that frequently involve a
number of factors
what is a fall Hazard - ✔✔A fall hazard is anything at your worksite that could cause
you to lose your balance or lose bodily support and result in a fall
What the minimum height in general industry that OSHA requires fall protection -
✔✔Four feet or more
What the general height in martime that OSHA requires fall protection - ✔✔Five feet
Whats the general height in construction that OSHA requires fall protection - ✔✔Six
feet
100% Pass Guarantee Katelyn Whitman, All Rights Reserved © 2025 1
, Regardless of the fall distance fall protection must be provided when working over
what. - ✔✔Dangerous equipment and machinery
If you are working on a scaffold fall protection is required when working and what
height - ✔✔Ten feet
Holes including skylights must cover that are capable of covering what amount of
weight - ✔✔At least twice the weight of employees of, equipment and material that
may be imposed on the cover at anytime.
On a worksite who should inspect all scaffolding and when should they be inspected -
✔✔A competent person should inspect the scaffolds before every shift
Supporting Stanchions that must be flagged at not more than______ and intervals with -
✔✔6 feet and high visibility material
who should design the scaffolds and prepare its rigging - ✔✔Someone who has very
specific knowledge and training
When holes are used for the passage of materials, the hole shall have not have more
than how many removable guard rail sections - ✔✔two
Every supported scaffold and its components must support what with out failure -
✔✔Its own weight and at lest four times the intended load
100% Pass Guarantee Katelyn Whitman, All Rights Reserved © 2025 2
Questions and Answers 100% Pass
Covers located on roadways and vehicular aisles shall be capable of supporting ,
without failure, at least - ✔✔Twice the maximum axle load of the largest vehicle
expected to cross over the cover.
Accidents involving falls are: - ✔✔Generally complex events that frequently involve a
number of factors
what is a fall Hazard - ✔✔A fall hazard is anything at your worksite that could cause
you to lose your balance or lose bodily support and result in a fall
What the minimum height in general industry that OSHA requires fall protection -
✔✔Four feet or more
What the general height in martime that OSHA requires fall protection - ✔✔Five feet
Whats the general height in construction that OSHA requires fall protection - ✔✔Six
feet
100% Pass Guarantee Katelyn Whitman, All Rights Reserved © 2025 1
, Regardless of the fall distance fall protection must be provided when working over
what. - ✔✔Dangerous equipment and machinery
If you are working on a scaffold fall protection is required when working and what
height - ✔✔Ten feet
Holes including skylights must cover that are capable of covering what amount of
weight - ✔✔At least twice the weight of employees of, equipment and material that
may be imposed on the cover at anytime.
On a worksite who should inspect all scaffolding and when should they be inspected -
✔✔A competent person should inspect the scaffolds before every shift
Supporting Stanchions that must be flagged at not more than______ and intervals with -
✔✔6 feet and high visibility material
who should design the scaffolds and prepare its rigging - ✔✔Someone who has very
specific knowledge and training
When holes are used for the passage of materials, the hole shall have not have more
than how many removable guard rail sections - ✔✔two
Every supported scaffold and its components must support what with out failure -
✔✔Its own weight and at lest four times the intended load
100% Pass Guarantee Katelyn Whitman, All Rights Reserved © 2025 2
