Module 3 Exam Questions and
Answers 100% Pass
You're in charge of a new construction work site. You must make sure no one gets hurt
and that everything complies with OSHA - ✔✔1. Inspect the jobsite and work surfaces
for hazards.
2. Determine that the work surfaces are strong enough to support the workers.
3. You find that work must be done near an unprotected edge 11 feet above lower
levels, so workers need fall protection.
4. Have guardrail systems constructed and inspected.
100% Pass Guarantee Katelyn Whitman, All Rights Reserved © 2025 1
, 5. Select and inspect the correct personal fall arrest systems, and make sure workers
know how to use them.
6. Begin work and ensure workers follow safe work procedures.
Safe Practices - ✔✔Personal Fall Arrest System - There is a hoisting area without
guardrails
Equipment Guards - Workers are working four feet above paving equipment
Fences - An eight-foot-deep hole is hidden by overgrown grasses.
Warning Line and Safety Monitoring Systems - Roofers are working on low-slope roofs
with unprotected sides
Hardhats and Barricades - Workers may be hit by falling tools and materials
Numbers to Remember - ✔✔1. Guardrail systems must be able to withstand a force of at
least 200 lbs at any point along the top edge
2. For pipe railings, posts shall be spaced not more than 8 feet apart on centers
3. A safety net's maximum mesh openings must not be longer than 6 inches on any side
4. Top rails must be 42 inches, plus or minus 3 inches, above the walking/working level
5. Intermediate members such as balusters, when used between posts, shall not be more
than 19 inches apart
6. Safety net drop-tests must consist of a 400 lbs bag of sand being dropped into the net.
100% Pass Guarantee Katelyn Whitman, All Rights Reserved © 2025 2
Answers 100% Pass
You're in charge of a new construction work site. You must make sure no one gets hurt
and that everything complies with OSHA - ✔✔1. Inspect the jobsite and work surfaces
for hazards.
2. Determine that the work surfaces are strong enough to support the workers.
3. You find that work must be done near an unprotected edge 11 feet above lower
levels, so workers need fall protection.
4. Have guardrail systems constructed and inspected.
100% Pass Guarantee Katelyn Whitman, All Rights Reserved © 2025 1
, 5. Select and inspect the correct personal fall arrest systems, and make sure workers
know how to use them.
6. Begin work and ensure workers follow safe work procedures.
Safe Practices - ✔✔Personal Fall Arrest System - There is a hoisting area without
guardrails
Equipment Guards - Workers are working four feet above paving equipment
Fences - An eight-foot-deep hole is hidden by overgrown grasses.
Warning Line and Safety Monitoring Systems - Roofers are working on low-slope roofs
with unprotected sides
Hardhats and Barricades - Workers may be hit by falling tools and materials
Numbers to Remember - ✔✔1. Guardrail systems must be able to withstand a force of at
least 200 lbs at any point along the top edge
2. For pipe railings, posts shall be spaced not more than 8 feet apart on centers
3. A safety net's maximum mesh openings must not be longer than 6 inches on any side
4. Top rails must be 42 inches, plus or minus 3 inches, above the walking/working level
5. Intermediate members such as balusters, when used between posts, shall not be more
than 19 inches apart
6. Safety net drop-tests must consist of a 400 lbs bag of sand being dropped into the net.
100% Pass Guarantee Katelyn Whitman, All Rights Reserved © 2025 2
