Certified Playground Safety Inspector CPSI
Sample Exam Questions (National Parks and
Recreation Association) Actual Exam Q&A.
Practice questions for this set
Learn
Studied terms
Nice work, you're crushing it
Continue studying in Learn
Terms in this set (74)
To be compliant with ASTM provide buyers with a parts list for the playground
1487, a designer or
manufacturer of
playground equipment
should
a partially bounded opening
2. The fish or wedge probe
is used to determine
whether or not a hazard
exists on
, 3. Which of the following is Critical height must equal or exceed fall height
correct regarding the impact-
attenuation of surfacing
material
4. When evaluating the hire a licensed professional engineer to certify the integrity of
structural integrity of a the equipment
support structure for a
swing that appears to be
failing, a CPSI should
5. Manufacturers of
playground equipment must:
provide the manufacturer's
identification of the
equipment
6. The majority of injuries falls to the surface on which the equipment was located
associated with playground
equipment result from
7. An opening may present a grabs the 5/8" (16mm) dowel
common crush or shear
hazard only if it
8. The criteria for unitary ASTM F1292 and F1487
surface materials includes
meeting requirements of
9. Regarding playground Signage may not prevent accidents but may reduce liability
safety signage, which of
the following is correct
Type of surfacing and amount of use
10. Which of the following
factors is MOST important
when determining the
frequency of inspections of
surfacing
Sample Exam Questions (National Parks and
Recreation Association) Actual Exam Q&A.
Practice questions for this set
Learn
Studied terms
Nice work, you're crushing it
Continue studying in Learn
Terms in this set (74)
To be compliant with ASTM provide buyers with a parts list for the playground
1487, a designer or
manufacturer of
playground equipment
should
a partially bounded opening
2. The fish or wedge probe
is used to determine
whether or not a hazard
exists on
, 3. Which of the following is Critical height must equal or exceed fall height
correct regarding the impact-
attenuation of surfacing
material
4. When evaluating the hire a licensed professional engineer to certify the integrity of
structural integrity of a the equipment
support structure for a
swing that appears to be
failing, a CPSI should
5. Manufacturers of
playground equipment must:
provide the manufacturer's
identification of the
equipment
6. The majority of injuries falls to the surface on which the equipment was located
associated with playground
equipment result from
7. An opening may present a grabs the 5/8" (16mm) dowel
common crush or shear
hazard only if it
8. The criteria for unitary ASTM F1292 and F1487
surface materials includes
meeting requirements of
9. Regarding playground Signage may not prevent accidents but may reduce liability
safety signage, which of
the following is correct
Type of surfacing and amount of use
10. Which of the following
factors is MOST important
when determining the
frequency of inspections of
surfacing
