Forklift Training List Exam Questions
and Answers 100% Pass
Retraining of Forklift Certification must occur - ✔✔1. When involved in an accident or
near miss
2. The operator is observed driving in an unsafe manner
3. The operating conditions or equipment changes
4. At least every 3 years
Powered Industrial Trucks are divided into - ✔✔7 classes of trucks that are based upon
their basic functions and characteristics
Class 1 - ✔✔Electric counterbalanced - No exhaust, often used indoors
Class 2 - ✔✔Narrow aisle lift trucks and order pickers - if operator is raised, must use
fall protection
Class 3 - ✔✔Electric powered hand trucks often called "pallet jacks" Only includes
powered pallet jacks. Some are walk-behind and some may be ridden
100% Pass Guarantee Emilly Charlotte, All Rights Reserved © 2025 1
, Class 4 - ✔✔Solid Rubber Tired Combustion Fueled counterbalanced forklift. Only used
on smooth surfaces. asphalt or concrete
Class 5 - ✔✔Pneumatic tired combustion fueled counterbalanced forklifts. Can be used
on unpaved surfaces, but not rough terrain
Class 6 - ✔✔Tow - Vehicles like those used at airports to pull planes and luggage carts.
Do not lift loads
Class 7 - ✔✔Counterbalanced, rough terrain forklift, Commonly used on construction
jobsites.
You may only operate the - ✔✔that you have been trained to operate
Designated Locations - ✔✔All trucks have hazardous location designations
Designation locations inform operators if the truck may be used in various -
✔✔flammable, combustible, or hazardous areas.
Equipment inspections should occur at the - ✔✔beginning of each shift and the vehicle
should be taken out of service if anything is found to be defective.
To assist with the inspection you should use an - ✔✔inspection form provided by your
employer .
Checklists may also be obtained in the - ✔✔Operator's manual, from the equipment
manufacturer, or a sample checklist has accompanied this training program
100% Pass Guarantee Emilly Charlotte, All Rights Reserved © 2025 2
and Answers 100% Pass
Retraining of Forklift Certification must occur - ✔✔1. When involved in an accident or
near miss
2. The operator is observed driving in an unsafe manner
3. The operating conditions or equipment changes
4. At least every 3 years
Powered Industrial Trucks are divided into - ✔✔7 classes of trucks that are based upon
their basic functions and characteristics
Class 1 - ✔✔Electric counterbalanced - No exhaust, often used indoors
Class 2 - ✔✔Narrow aisle lift trucks and order pickers - if operator is raised, must use
fall protection
Class 3 - ✔✔Electric powered hand trucks often called "pallet jacks" Only includes
powered pallet jacks. Some are walk-behind and some may be ridden
100% Pass Guarantee Emilly Charlotte, All Rights Reserved © 2025 1
, Class 4 - ✔✔Solid Rubber Tired Combustion Fueled counterbalanced forklift. Only used
on smooth surfaces. asphalt or concrete
Class 5 - ✔✔Pneumatic tired combustion fueled counterbalanced forklifts. Can be used
on unpaved surfaces, but not rough terrain
Class 6 - ✔✔Tow - Vehicles like those used at airports to pull planes and luggage carts.
Do not lift loads
Class 7 - ✔✔Counterbalanced, rough terrain forklift, Commonly used on construction
jobsites.
You may only operate the - ✔✔that you have been trained to operate
Designated Locations - ✔✔All trucks have hazardous location designations
Designation locations inform operators if the truck may be used in various -
✔✔flammable, combustible, or hazardous areas.
Equipment inspections should occur at the - ✔✔beginning of each shift and the vehicle
should be taken out of service if anything is found to be defective.
To assist with the inspection you should use an - ✔✔inspection form provided by your
employer .
Checklists may also be obtained in the - ✔✔Operator's manual, from the equipment
manufacturer, or a sample checklist has accompanied this training program
100% Pass Guarantee Emilly Charlotte, All Rights Reserved © 2025 2
