Forklift Certification Exam Questions
and Answers 100% Pass
What does the following hand signal indicate --> hands to each side bent at the elbow
with palms facing up and hands in a fist - ✔✔extend the boom
What does the following hand signal indicate --> hand out to your side with palm down
moving left to right - ✔✔stop
Who can give signals to the Telehandler operator ? - ✔✔an designated and qualified
person
What does the following hand signal indicate --> both hands out to your sides with
palm facing down moving them from left to right - ✔✔stop everything immediately
If working near power lines and the voltage is unknown , what must be done? - ✔✔call
the power company and find out
True or False : The coordinator and the signal person can give signals at the same time -
✔✔false
100% Pass Guarantee Emilly Charllote, All Rights Reserved © 2025 1
, True or False : A traveling telescopic forklift that makes a sudden stop will decrease
dynamic load. - ✔✔false
Which Statement is true?
Equipment tie down chains can be used to lift object
When lifting people you must first perform a test lift with expected lift weight -
✔✔When lifting people you must first perform a test lift with expected lift weight
True or False : It is acceptable for a certified welder to weld something on forks -
✔✔false
True or False : using past experience is NOT an acceptable means of determining object
weights - ✔✔false
Which Statement is true?
If a crane has a front outrigger it is ok to lift over the front
Only lift over the front of a crane if it is acceptable per the manufacturer - ✔✔Only lift
over the front of a crane if it is acceptable per the manufacturer
The formula of determining load weights of a rectangle is : - ✔✔Length x Width x
Height = Volume X Lbs. per cubic ft.
True or False : The dynamic load may be decreased by the following : wind , snatching ,
sudden stops, & fast swinging - ✔✔false
100% Pass Guarantee Emilly Charllote, All Rights Reserved © 2025 2
and Answers 100% Pass
What does the following hand signal indicate --> hands to each side bent at the elbow
with palms facing up and hands in a fist - ✔✔extend the boom
What does the following hand signal indicate --> hand out to your side with palm down
moving left to right - ✔✔stop
Who can give signals to the Telehandler operator ? - ✔✔an designated and qualified
person
What does the following hand signal indicate --> both hands out to your sides with
palm facing down moving them from left to right - ✔✔stop everything immediately
If working near power lines and the voltage is unknown , what must be done? - ✔✔call
the power company and find out
True or False : The coordinator and the signal person can give signals at the same time -
✔✔false
100% Pass Guarantee Emilly Charllote, All Rights Reserved © 2025 1
, True or False : A traveling telescopic forklift that makes a sudden stop will decrease
dynamic load. - ✔✔false
Which Statement is true?
Equipment tie down chains can be used to lift object
When lifting people you must first perform a test lift with expected lift weight -
✔✔When lifting people you must first perform a test lift with expected lift weight
True or False : It is acceptable for a certified welder to weld something on forks -
✔✔false
True or False : using past experience is NOT an acceptable means of determining object
weights - ✔✔false
Which Statement is true?
If a crane has a front outrigger it is ok to lift over the front
Only lift over the front of a crane if it is acceptable per the manufacturer - ✔✔Only lift
over the front of a crane if it is acceptable per the manufacturer
The formula of determining load weights of a rectangle is : - ✔✔Length x Width x
Height = Volume X Lbs. per cubic ft.
True or False : The dynamic load may be decreased by the following : wind , snatching ,
sudden stops, & fast swinging - ✔✔false
100% Pass Guarantee Emilly Charllote, All Rights Reserved © 2025 2
